495107
6
Zoom out
Zoom in
Previous page
1/12
Next page
Installing two 525 or 3301 Leslies with 11-pin Leslie cable assembly
1. Place your Leslie 525 or 3301 speakers in a location that produces the best sound reproduction.
2. Review the position of your organ or keyboard and determine the best method of routing the optional
Leslie cable assemblies.
3. Plug the male end of the optional 11-pin stereo Leslie “Y” adapter into the 11-pin Leslie connector on the
back of your organ or keyboard.
4. Connect the male end of an optional 11-pin Leslie cable assembly into the left-channel Leslie connector
on the 11-pin stereo “Y” adapter. Connect the other end of the 11-pin Leslie cable assembly to the Leslie
525 or 3301 which will be used for the left-channel audio.
5. Connect the male end of another 11-pin Leslie cable assembly into the right-channel Leslie connector on
the 11-pin stereo “Y” adapter. Connect the other end of the 11-pin Leslie cable assembly to the Leslie 525
or 3301 which will be used for the right-channel audio.
6. Plug the AC power cords from the Leslies into a 120V AC outlet.
7. Turn the Master volume controls on the Leslies (see page 3) to the fully counterclockwise position. Set
the bass and treble controls to the mid-position.
8. If you are connecting a Hammond organ to your Leslie, pull all the upper and lower drawbars including
the pedal drawbar fully out (#9 positions). Set the expression pedal to the loudest position (fully
depressed). For non-Hammond products, set the volume control to the loudest position and set the voice
registration to a setting that provides maximum sound (i.e. Full organ).
9. Turn on the power switch on your organ or keyboard product. For organs, play a three-note chord on the
upper and lower manuals and depress the low “C” pedal. For keyboards, place the unit in the split
keyboard mode and play a three-note chord on the upper manual and the low ”C” pedal note. Have
someone slowly turn the volume control clockwise on one of the Leslies until the sound begins to
distort, then slowly decrease the volume (turn the control counterclockwise) until the sound is undistorted.
Your volume control is now properly set. Repeat this procedure for the other Leslie speaker.
This Setup procedure should be followed when connecting a stereo organ or keyboard equipped with an
11-pin Leslie connector to two Leslie 525s or 3301s. This installation provides true stereo imaging by
providing left and right audio channels. The purchase of an optional 11-pin stereo Leslie “Y” adapter and
two Leslie cable assemblies from your local Leslie dealer is required to complete this installation.
Caution: Do not play your Leslie at a volume setting that produces a distorted sound. Severe damage
may occur to your new Leslie if played in this condition for an extended period of time.
Leslie 525 or 3301
Leslie 525 or 3301
Organ or Keyboard product
11-pin Leslie cable assembly 11-pin Leslie cable assembly
11-pin stereo Leslie
“Y” adapter
OWNERS MANUAL Models 525, 3301
5
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond Leslie 3301 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond Leslie 3301 in the language / languages: English as an attachment in your email.

The manual is 15,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info