495097
8
Zoom out
Zoom in
Previous page
1/35
Next page
4
GENERAL
ON
POW ER
OFF
ROTARY
STATIONARY
L R
ROT
BA SS
LEV
VOLUME
O
10
O
10
O
10
Ë Connecting to the XE-1/CMS-100/XT-series/XH-series using the 11-pin
receptacle
The above example show a Hammond XE-1 connected to a Leslie Horn Unit. The audio signal is
connected via an 11-pin Leslie Cable. The above hookup can be used with any current Hammond
Organ; however, all MIDI features may not be able to be controlled. Please see page 27 for more
information.
To make this hookup:
1. Make sure the power to both units is “OFF.”
2. Set the STATIONARY Volume Controls on the Leslie Speaker to a low setting (the 10
o’clock position is recommended) when first making the connection.
3. Set the ROTARY Volume Control to a low setting (the 10 o’clock position is
recommended) when first making the connection.
4. Plug the female end of the Leslie Connector Cable into the receptacle on the back of the
Leslie Speaker.
5. Plug the male end of the Connector Cable into the 11-pin Leslie socket of the organ.
6. Turn the organ “ON.” After about 5 seconds, the Leslie Speaker will turn “ON.” Then
adjust the volume settings of both units to your liking.
NOTE: In addition, a MIDI cable can be connected from the MIDI OUT of the organ to the MIDI IN of the
Leslie to allow the organ to control the Advanced Features of the Leslie.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond Leslie 2103 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond Leslie 2103 in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info