495098
23
Zoom out
Zoom in
Previous page
1/26
Next page
23
MIDI Information
[Channel Voice Message]
Control Change
Program Change
Status 2nd Byte
Program Change messages etc. are received.
Cn pp
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
Modulation(Leslie Speed)
pp=Program Number 0:preset1 1:preset2
Status 2nd Byte 3rd Byte
Program Channel: Change Preset.
Bn 01 vv
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
System Exclusive Message
vv=Modulation Depth: 00 - 7F
Memory Dump
Data Entry
F0
System Exclusive
Status 2nd Byte 3rd Byte
55
SUZUKI ID
Bn 06 mm (MSB)
10
Device ID
Bn 26 ll (LSB)
10
Model ID MSB
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
1C
Model ID LSB
mm,ll=Value for the Parameter designated by NRPN.
11
Command: Data Packet
[TYPE]
Data Type
Expression(Leslie Speed)
00h= Memory Dump
Status 2nd Byte 3rd Byte
[PNH]
Packet Number MSB
Bn 0B vv
[PNL]
Packet Number LSB
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
[DATA]
128 Bytes Data
vv=Expression: 00 - 7F(0 - 127) 256 Bytes nibblized ASCII
Default Value = 7F(127) ex: 7Eh = 37h, 45h
Korg Rotary Fast Code
[CHD]
Check Digit
Status 2nd Byte 3rd Byte
Lower 7 bits of XOR [DATA]
Bn 52 vv
F7
End of Exclusive
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
vv=Control Value: 00 - 7F(0 - 127) 0-63 = Off, 64-127 = On
Roland Leslie Slow Fast
Korg Rotary Brake Code
F0
System Exclusive
Status 2nd Byte 3rd Byte
41
Roland ID
Bn 53 vv
10
Device ID
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
00
Model ID MSB
vv=Control Value: 00 - 7F(0 - 127) 0-63 = Off, 64-127 = On
08
Model ID LSB
12
Command ID
Hold 1(Leslie Slow/Fast initial Code)
02
address1
Status 2nd Byte 3rd Byte
00
address2
Bn 40 vv
10
address3
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
3D
address4
vv=Control Value: Leslie Slow/Fast Control Type=Mormentary:
[DATA]
00:Slow 01:Fast
00 - 7F(0 - 127) 0-63 = Off, 64-127 = On
[SUM]
no check
Leslie Slow/Fast Control Type=Altarnate:
F7
End of Exclusive
00 - 7F(0 - 127) 64-127 = Latch
NRPN MSB/LSB
Status 2nd Byte 3rd Byte
Bn 63 mm (MSB)
Bn 62 ll (LSB)
n=MIDI Channel Number: 0 - F(Ch.1 - 16)
mm=Upper Byte of the Parameter Number designated by NRPN[MSB].
ll=Lower Byte of same[MSB].
NRPN- "Non Registered Parameter Number"
The expansive range named NRPN is provided in the Control Change,
which function is specific on each equipment and not defined in the
MIDI Standard.
When you use it, designate the parameter to control, by gibing NRPN MSB
and NRPN LSB (cc#98 and 99), and the set the value of the designated
parameter by the Data Entry MSB(cc#6).
Once the NRPN parameter is designated, all the data entry received into
the same channel after that is regarded as the change of the value of the
parameter. To avoid any mis-operation, we suggest you to set RPN Null
(RPN = 7F 7F), after setting the necessary parameter value.
The value set by the Control Change is not reset even when
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond Leslie 2101mk2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond Leslie 2101mk2 in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info