495083
24
Zoom out
Zoom in
Previous page
1/130
Next page
*#1 $OM%OM$2OMOwner’s Manual
24
Accessory Panel (B-3P mk2)
SOUND INPUT TERMINAL
47. LINE IN Jack
These jacks are for connecting an external sound module or a
CD player. The signals input to this jack are output to the LINE
OUT jack, and headphone jack, the stationary channel of a so-
equipped Leslie Spaker. (Rating Input Level: 1.23V +4dBm, In-
put Impedance: 5k)
SOUND OUTPUT TERMINAL
48. LINE OUT Jack
These jacks are a stereo main out for the organ post-internal
effects.
Use both L and R, if the connected mixer or monitor speaker is
stereo, and use only L, if monaural.
When a Leslie speaker is connected, the built-in Leslie effect
appears only on the L jack.
49. PEDAL OUT Jack
This is an independent output terminal for the Pedal part.
EFFECT LOOP
50. SEND Jack
This is a post-internal effects patch-out point.
When a plug is inserted to this jack, signals inside the organ are
cut off. (Rating Output Level: 1.23V +4dBm, Output Imped-
ance: 600)
51. RETURN Jack
This is a post-internal effects patch-in point.
This jack is used also as the input terminal to the rotary channel
from an external sound engine. (Rating Input Level: 1.23V
+4dBm, Input Impedance: 10k)
MIDI TERMINAL
52. MIDI OUT Jack
This is for sending MIDI information to external MIDI equip-
ment such as a Synthesizer or Sound Module.
53. MIDI PEDAL IN Jack
This is the input terminal for a MIDI Pedalboard.
LESLIE SOCKETS
54. MAIN
Connect the first Leslie speaker to this socket. If the Main/Echo
switch (optional) is connected to the MAIN/ECHO jack on the
Volume Panel (#22), Sound is not passed unless you set the switch
at the MAIN position.
55. ECHO
Connect the second Leslie speaker to this socket. Sound is not
passed unless you set the switch to the ECHO position when the
Main/Echo switch (optional) is connected to this organ.
Power Panel (B-3P mk2)
AC INLET
56. AC INLET
Connects the A.C. Power Cable.
CAUTION
This organ shall be connected to a MAINS
socket outlet with a protective earth (ground)
connection.
PEDAL CONNECTORS
57. EXP. PEDAL Connector
Connect the Expression Pedal (provided) here.
If no expression pedal is connected, the volume is set to
maximum, as if the pedal were fully depressed.
58. PEDALBOARD Connector
Connect the Pedalboard PK-25PR (optional) here.
53
54
51
52
55
56
47
48
4950
58
57
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammond B-3 mk2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammond B-3 mk2 in the language / languages: English as an attachment in your email.

The manual is 6,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info