Manual Hammer Cardio CE1 (page 22 of 32) (English, German)

542127

Zoom out

Zoom in

1/32

D.Time will count down from 60 seconds to 0 second.

E.When time reaches 0, the test result (F1-F6) appears on the display.

F1=Excellent F2=Good F3=Fair F4=below average F5= No Good F6=

Poor(See fig 42)

F.If the computer does not detect your current heart rate first,

pressing RECOVERY will not enter into pulse recovery test. During the

pulse recovery test, press RECOVERY to exit the test and return to the

stop status.

4. Pulse Measurement

Please place both your palms on the contact pads and the computer

will show your current heart beat rate in beats per minute (BPM) on

the LCD after 3~4 seconds. During the measurement, heart icon will

flash with simulative ECG showing.

Remark: During the process of pulse measurement, because of the

contact jamming, the measurement value may not be stable when

start, then it will return to normal level. The measurement value cannot

be regarded as the basis of medical treatment.

NOTE:If the computer is also equipped with wireless heart rate

measuring via the transmitter belt,and with hand pulse function, the

hand-measurement-signal-detecting is preferred.

5.4 DISPLAY

Speed KM/H(M/H): showing your current speed. Range: 0.0 99.9

KM/H(M/H).

RPM: showing the current rotate per minute. Range : 0 999.

TIME: the accumulative exercise time, range : 0:00 99M59S.

Preset time range is 5:00 99M00S. The computer will start to count

down from preset time to 0:00 with average time for each resistance

level. When it reaches to zero,the program will stop and computer

alarm.If you do not preset the time, it will run with one minute

decrement each resistance level.

DIST: the exercise accumulative distance. Range : 0.0 99.9

999KM(MILE) the preset distance range :1.0 99.9 999. When the

distance reaches 0, the program will stop and the computer will

alarm.

CALORIE: the exercise accumulative calories burnt. Range : 0.0 99.9

999 the preset calories range :10.0 90.0 990. When the calorie

reaches 0, the program will stop and the computer will alarm.

PULSE: showing the exercise heart rate value. Range: 30 240BPM(beat

per minute)

RESISTANCE LEVEL: showing resistance level. Range:1 16

WATT: show the exercise watt

BREAKDOWN DISPLAY

1.When the computer displays ERROR1, please check if the motor is

good and if the motor wires connect well.

2. When the computer displays ERROR2, please check if your hands

contact the sensors well as there no body fat signal detected.

ADAPTOR

INPUT: AC (The voltage depends on different country)

OUTPUT: 8VDC 500mA

D.Der Countdown läuft von 60 Sekund auf 0.

E.Nachdem die Uhr 0 erreicht, wird ihr Resultat im Display angezeigt.

(F1.0-F6.0)

F1.0=sehr gut F2.0=gut F3.0=befriedigend F4.0=ausreichend

F5.0=mangelhaft F6.0=ungenügend (s fig 42)

F.Wenn der Computer nicht gleich ihre Herzfrequenz misst, drücken

Sie erneut die Recovery-Taste. Es wird nicht automatisch der PULSE

RECOVERY TEST gestartet. Während des PULSE RECOVERY TESTS

drücken Sie RECOVERY, um das Programm zu verlassen.

4. Pulse Measurement

Halten Sie mit beiden Händen die Sensoren fest. Nach 3-4 Sekunden

zeigt der Computer ihnen ihre aktuelle Herzfrequenz an. Während der

Messung ist auf dem Display ein blinkendes Herz zu sehen.

Anmerkung: Zu Beginn der Pulsmessung kann es zunächst zu

einer wechselhaften Pulsanzeige kommen, die sich aber schnell

normalisiert. Die Messung wird nicht auf der Basis einer medizinischen

Untersuchung durchgeführt und kann nicht mit einer solchen

verglichen werden.

HINWEIS: Wenn der Computer über den Empfang von Brustgurten

verfügt, dann ist dieser für das Training zu bevorzugen.

5.4 ANZEIGENBEREICH

Speed KM/H(M/H): aktuelle Geschwindigkeit: 0.0~99.9 KM/H(M/

H).

RPM: aktuelle Anzahl der Umderhungen pro Minute. Range: 0~999..

TIME: Zeitanzeige: 0:00~99M59S. Voreingestellte Zeit beträgt 5:00

~99M00S. Der Computer startet von der voreingestellten Zeit

rückwärts bis 0 zu laufen. Das Programm stoppt automatisch und es

ertönt der Alarm.

DIST: Kilometeranzeige: 0.0~99.9~999KM Voreingestellte Entfernung:

1.0~99.0~999. Wenn die Distanz 0 erreicht, ertönt der Alarm und

das Programm stoppt.

CALORIE: Kalorienanzeige: 0.0~99.9~999 Voreingestellte

Kalorienanzeige: 10.0~90.0~990. Wenn die Kalorien 0 erreicht,

ertönt der Alarm und das Programm stoppt.

PULSE: Pulsanzeige: 30~240BPM (Schläge pro Minute)

RESISTANCE LEVEL: Zeigt die Widerstandsstufe von:1~16

WATT: Wattanzeige

FEHLERMELDUNG

1.Kommt folgende Meldung ERROR1, bitte den Motor überprüfen und

ob das Kabel richtig angeschlossen ist.

2. Kommt folgende Meldung ERROR2, überprüfen Sie bitte, ob ihre

Hände die Handsensoren richtig umfassen.

ADAPTER

INPUT: AC (Länderabhängig)

OUTPUT: 8VDC 500mA

fig 41 fig 42

I have two crosstrainers Hammer Cardio CE1. The force I need to apply on the first is very different then on the other while all settings are exactly the same. How can this be? And how can I change this? I think the first one is correct and the other one needs far too little effort. Submitted on 13-8-2022 at 09:53
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hammer Cardio CE1 in the language / languages: English, German as an attachment in your email.

The manual is 5,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hammer Cardio CE1 Manual

Product: