655933
4
Zoom out
Zoom in
Previous page
1/22
Next page
Der Anwendungsbereich dieses Trainingsgerätes ist der
Heimbereich. Das Gerät entspricht den Anforderungen
der DIN EN 957-1/9 Klasse HC. Die CE-Kennzeichnung
bezieht sich auf EG Richtlinie 2004/108/EG . Bei
unsachgemäßem Gebrauch dieses Gerätes (z. B. über-
mäßigem Training, falsche Einstellungen, etc.) sind
Gesundheitsschäden nicht auszuschließen.
Vor Beginn des Trainings sollte eine allgemeine
Untersuchung von Ihrem Arzt durchgeführt werden, um
eventuelle vorhandene Gesundheitsrisiken
auszuschließen.
2.1 Verpackung
Die Verpackung besteht aus umweltfreundlichen
und wieder verwertbaren Materialien:
Außenverpackung aus Pappe
Formteile aus geschäumtem, FCKW-freiem
Polystyrol (PS)
Folien und Beutel aus Polyäthylen (PE)
Spannbänder aus Polypropylen (PP)
2.2 Entsorgung
Dieses Produkt darf am Ende seiner
Lebensdauer nicht über den norma-
len Haushaltsabfall entsorgt werden,
sondern muss an einem Sammelpunkt
für das Recycling von elektrischen und
elektronischen Geräten abgegeben wer-
den. Die Werkstoffe sind gemäß ihrer
Kennzeichnung wiederverwertbar. Mit
der Wiederverwendung, der
stofflichen Verwertung oder anderen Formen der
Verwertung von Altgeräten leisten Sie einen wichtigen
Beitrag zum Schutze unserer Umwelt. Bitte erfra-
gen Sie bei der Gemeindeverwaltung die zuständige
Entsorgungsstelle.
Um den Zusammenbau des Crosstrainers für Sie so ein-
fach wie möglich zu gestalten, haben wir die wichtigsten
Teile bereits vormontiert. Bevor Sie das Gerät zusam-
menbauen, sollten Sie bitte diese Aufbauanleitung sorg-
fältig lesen und danach Schritt für Schritt, wie beschrie-
ben, fortfahren.
Packungsinhalt
Entnehmen Sie alle Einzelteile aus der Styroporform
und legen Sie diese nebeneinander auf den Boden.
Stellen Sie den Hauptrahmen auf eine
bodenschonende Unterlage, da ohne montierte
Standfüße Ihr Boden beschädigt/verkratzt werden
könnte. Diese Unterlage sollte flach und nicht zu dick
sein, sodass der Rahmen einen stabilen Stand hat.
In order to make assembly of the crosstrainer as easy
as possible for you, we have preassembled the most
important parts. Before you assemble the equipment,
please read these instructions carefully and then conti-
nue step by step as described
Contents of packaging
Unpack all individual parts and place them
alongside each other on the floor.
Place the main frame on a pad protecting the floor,
because without its assembled base feet it can
damage / scratch your floor. The pad should be flat
and not too thick, so that the frame has a stable
stand.
This training equipment is for use at home. The equip-
ment complies with the requirements of DIN EN 957-
1/9 Class HC. The CE marking refers to the EU Directive
2004/108/EEC. Damage to health cannot be ruled out
if this equipment is not used as intended (for example,
excessive training, incorrect settings, etc.).
Before starting your training, you should have a
complete physical examination by your physician,
in order to rule out any existing health risks.
2.1 Packaging
Environmentally compatible and recyclable materials:
External packaging made of cardboard
Molded parts made of foam CFS-free polystyrol (PS)
Sheeting and bags made of polyethylene (PE)
Wrapping straps made of polypropylene (PP)
2.2. Disposal
Please be sure to keep the packing for
the event of repairs / warranty mat-
ters. The equipment should not be
disposed of in the household rubbish!
2. Allgemeines
3. Aufbau 3. Assembly
2. General
03
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hammer 4190 Ellyptech CT5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hammer 4190 Ellyptech CT5 in the language / languages: English, German as an attachment in your email.

The manual is 7,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hammer 4190 Ellyptech CT5

Hammer 4190 Ellyptech CT5 User Manual - English, Dutch - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info