813446
10
Zoom out
Zoom in
Previous page
1/32
Next page
Page 10 BK745
Hamlet Soluon Inset (S4) Stove User Guide
4 Before using your stove
4.1 Pointers Before Use
Solution Inset S4 stoves are designed to be operated with the fire door closed at all
times, apart from refuelling (when alight) or cleaning (when cold).
Never leave the appliance unattended for an extended length of time with the door open.
Prior to lighting the stove for the first time, please check with the installer that:
Installation and all building work is complete. (Refer to the installation guide.)
The chimney is sound, has been swept and is free from obstruction.
Building Regulations and any local by-laws have been followed during installation.
All firebox liner panels and throat plate are in place.
The chimney draw has been checked and is within specification (between 0.12mb to
0.2mb, or 12 - 20 pascals). This ensures your stove will operate predictably and
efficiently.
Carbon Monoxide detector is correctly installed in the same room as the appliance.
Suitable provision for combustion and ventilation air, depending upon building
regulations have been undertaken by the installation fitter.
Consideration must be given for the need for extra ventilation if another heating
source needing air is to be operated simultaneously. If an extraction fan is proposed
to be fitted to a connecting area of the house, after the stove has been installed,
professional advice should be sought from a qualified engineer.
Ensure that you have read and understood these instructions before lighting the fire.
Always wear suitable protective fire gloves when refuelling your stove, such as the hot
glove supplied with your stove. Always keep the hot glove away from naked flames and
sparks, when re-fuelling the appliance.
We recommend that you light a small fire for the first few days of use to cure the paint and
allow the castings to relax.
You may hear your stove produce clicking or ticking noises whilst it heats up or cools
down. This is completely normal and is produced by the expansion and contraction of the
steel components in your stove when its temperature changes.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hamlet Solution Inset at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hamlet Solution Inset in the language / languages: English as an attachment in your email.

The manual is 1.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info