773332
4
Zoom out
Zoom in
Previous page
1/45
Next page
p. 11 p. 12
as it affects the stability of the trailer.
Bicycle safety
Before connecting the bicycle trailer to your bicycle, ensure your bicycle is suitable for towing a trailer according to the bicycle
manufacturer’s instruction and is equipped with well functioning brakes. It is recommended that the bicycle to which the trailer
will be aached undergoes a safety check by a qualified bicycle mechanic before aaching the trailer. Bicycle trailers pulled by
an EPAC can be restricted by law.
Riding behavior
When towing a trailer, your bicycle behaves heavier and less responsive due to the weight of the trailer. Familiarize yourself with
this behavior by experimenting with a loaded trailer in a quiet area first, before entering crowded public roads.
Be aware that due to the weight of the trailer, your bicycle has a longer braking distance. Use caution when driving down hill, as
your bicycle will gain more speed rapidly.
Do not exceed the maximum speed specified in this manual and slow down when making turns and on rough roads. Avoid riding
over rocks, curbs or other obstacles that may cause the trailer to tip over. Using the trailer in unfavorable weather, road or traffic
conditions can result in unsafe situations. Always use good judgement when deciding if conditions are safe to use the trailer.
High visibility
For optimal visibility and safety in the traffic, the multifunctional carrier has front (white), rear (red) and wheel (orange)
reflectors. The tires also have reflective lines. Reflective piping is integrated in the outer fabric. When using the carrier as a
bicycle trailer, you also need to apply the orange safety flag for even beer visibility.
Intended use
The trailer is intended for transportation of children as specified in this manual on public roads with light traffic, sidewalks and
smooth paths. Hamax considers using the trailer in any other way as unintended use, including but not limited to:
• riding with excessive speed
• riding on rough off-road conditions
• using the trailer for commercial purposes
• transporting animals
• storing luggage in areas inside or outside the trailer other than in the trailer’s luggage compartment
• towing the trailer by motorized vehicles
• failing to comply with the instructions in this manual
GETTING STARTED - INSTALLATION
[1] Packaging content & required tools
• Trailer body (1x) [1a]
• Quick release wheel (2x) [1b]
• Bicycle arm (1x) [1c]
• Wheel guard including 2 screws
for installation (2x) [1d]
• Safety flag (1x) [1e]
• Stroller wheel (1x) [1f]
• User manual Hamax Outback / Outback One (1x)
• Included tools: Torx screw driver with pipe wrench [1g]
• Required tools: Wrench, size 15 [1h]
• Rear light [1i, model can differ from picture]
[2] Product overview
• Push bar [2a]
• Front cover pocket [2b]
• Front cover [2c]
• Seat paddings [2d]
• Safe connection point [2e]
• Accessory, stroller wheel [2f]
• Adjustable suspension [2g]
• Quick release wheel [2h]
• Wheel guard [2i]
• Seat backrest rear [2j]
• Push bar release handle [2k]
• Storage space [2l]
• Parking brake [2m]
[3] Installing the hitch on your bicycle
• Remove quick-release or nut [3a] from the le side of your bicycle’s rear wheel axle. Place hitch [3b] between quick-release or
nut and frame. Tighten the quick-release or nut back on according to the bicycle manufacturer’s instructions.
• Ensure that the orientation of the hitch is correct. Keep the alignment / angle between hitch and bicycle arm as straight as
possible.
[4] Installing the wheel guards
• Align the holes [4a] on the wheel guard plate with the holes on the wheel guard [4b]. Insert the 2 screws from the inside of the
trailer through the holes in the fabric into the wheel guard. Use the screws provided with the trailer. Fasten both sides in the
same way.
[5] Seing the adjustable suspension
• The suspension can be adjusted to give a comfortable ride. Ensure that the suspension is always set to match your children’s
weight. Ensure that the trailer is unloaded when adjusting the suspension. Rotate the adjustment ring [5a] to the desired
position. Make sure that the le and right suspension are in the same position.
[6] Unfolding the trailer
• Pull push bar upwards until the auto-lock engages on both sides.
• Verify that the folding mechanism is locked on both sides by trying to push it back down.
• Lock the push bar with the release handle.
[7] Folding the trailer
• Ensure that the push bar is unlocked.
• Push the folding lock buon [7a] in and than pull the straps towards you [7b] until the auto-lock is disengaged on both sides.
• Guide the trailer down into its folded position.
[8] Installing the quick release wheels
• Ensure that the parking brake is not engaged [2m].
• Make sure that you remove the cap that is protecting the wheel axle [8a]. Press the push buon [8b] and insert the wheel axle
into the socket. Verify that the wheel is securely fastened by pulling the wheel.
[9] Mounting the safety flag
• Place the flag pole [9a] into the socket [9b] on the side of the bicycle trailer that is most exposed to the road.
USE
[10] Aach the accessory [1c] [1f] at the safe connection point
• Make sure the slider [10b] is upwards. Slide the accessory [10c] into the opening at the front until it locks into place.
• Move the slider downwards until it snaps into place. The green color indicates that the connection point is locked. Verify that
the slider is locked by pulling it upwards.
[11] Remove the accessory [1c] [1f] from the safe connection point
• Push the grey buon and move the slider upwards until it snaps in place.
• Push and hold the buon on the accessory down. Pull the accessory out of the Safe Connection Point.
TIP: You can use the handle [10a] in the connection point when changing your accessories.
[12] Aaching the bicycle arm to the bicycle
• Securely aach draw bar & safety strap prior to use. Ensure that the trailer is unloaded when aaching & disconnecting it to/
from your bicycle.
• Slide the bicycle arm onto the hitch [12a]. Insert the retaining pin [12b] through the hole in bicycle arm and close it. Verify that
the bicycle arm is securely fixed by pulling the bicycle arm. Wrap safety strap around bike frame and fasten hook to D-ring
[12c].
• Make sure that you put the safety strap around the chain stay [12d] or seat stay [12e] of your bicycle frame.
TIP: When you are not using the bicycle arm you can store it in the trailer.
TIP: When the safety strap is too long you can wrap it twice around the frame to ensure that the strap does not interfere with
any moving part of the rear wheel.
[13] Adjusting the push bar
• Turn the push bar release handle [2k] upwards to unlock the push bar [2a].
• Rotate the push bar to the desired position.
• Turn the push bar release handle downwards until you feel it locks into its end position and secures the push bar. Verify that the
push bar is locked by gently pushing the push bar down.
[14] Using the parking brake
• To engage: Push the parking brake pedal down. The trailer can move slightly back and forth due to the movement in the
adjustable suspension.
• To disengage: Pull the parking brake pedal until it releases. Push or pull the trailer slightly to make sure the brake is disengaged
at the wheels.
[15] Front covers and shades
• The Outback bicycle trailer has a plastic front cover [15c], a mesh front cover [15d] and an additional sun shade [15b]. To open
and close the front covers, use the zippers along the sides. To fix the sunshade use the Velcro. The front covers can be stored
into the front cover pocket [15a] when not in use.
• The top window of the exterior also has an optional sunshade. [15e]
TIP: For heavy rain Hamax supplies a full rain cover.
[16] 5-point safety harness
• Seat your child and guide the arms through the opening between the shoulder [16a] and waist belt [16c]. Check that the
10846, Rev. 009, Manual Hamax Outback 2in1 EN and ASTM, 2020.05.12.indd 11-12 5/12/2020 4:51:57 PM
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hamax Outback at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hamax Outback in the language / languages: English, German, Dutch, French, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6.64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info