723758
7
Zoom out
Zoom in
Previous page
1/10
Next page
4
Risk of electric shock
Do not open the device or continue to operate it if it
becomes damaged.
Do not use the product if the AC adapter,adapter
cable or power cable is damaged.
Do not attempt to service or repair the device
yourself.Leave any service work to qualied experts.
4.Positioning the subwoofer in the room
Place the subwoofer on a at, stable surface that
withstands vibrations. To get the best sound quality,the
subwoofer should be placed on the oor.
5. Before getting started
Notes on use
The subwoofer is operated additionally using the UNDOK
app and your smartphone.
Note
Adetailed description of the UNDOK app and
the fullscope of functions can be found in our
UNDOK guide at:
www.hama.com -
>
00054845 -
>
Downloads
Setting up anetwork connection
5.1 LAN (wired network)
Connect aLAN connection of your router to the LAN
connection (10) on your subwoofer.Todothis, you will
requireanEthernet cable, which is not included in the
delivery.
Make surethat the router is on and working properly,
and that you have an Internet connection.
See the operating instructions for your router regarding a
properly functioning LAN connection.
Then proceed as described in point 5, 'Getting Started'.
5.2 WLAN (wireless network)
Make surethat the router is on and working properly,
and that you have an Internet connection.
Activate your router’sWLAN function.
See the operating instructions for your router regarding a
properly functioning WLAN connection.
Then proceed as described in point 5, 'Getting Started'.
6. Getting started
Warning
Only connect the product to asocket that has been
approved for the device. The electrical socket must
always be easily accessible.
Disconnect the product from the power supply using
the on/off switch –ifthis is not available, unplug the
power cordfromthe socket.
When using amulti-socket power strip, make sure
that the sum power draw of all the connected devices
does not exceed its maximum throughput rating.
If you will not be using the product for along period
of time, disconnect it from mains power.
Turning on the product
Connect the power cable of the subwoofer to aproperly
installed socket.
Move the [POWER] switch (13) to the ON position.
The Power status LED (1) is lit red.
Press [STANDBY/VOLUME] (2) to switch on the
subwoofer.
Note –Turning on for the rst time
When switched on for the rst time, the subwoofer is
in SETUP mode.
The Power status LED (1) begins to ash green.
Youcan set up the device using the UNDOK app.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama SW01M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama SW01M in the language / languages: English as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hama SW01M

Hama SW01M User Manual - German - 10 pages

Hama SW01M User Manual - French - 10 pages

Hama SW01M Quick start guide - All languages - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info