723724
14
Zoom out
Zoom in
Previous page
1/20
Next page
7
Note -Bluetooth
®
password
Some devices requireapasswordinorder to connect
to another
Bluetooth
®
device.
If your device requests apasswordtoconnect
to the loudspeaker,enter 0000.
7.1 Automatic
Bluetooth
®
connection
(after successful pairing)
Devices that have already been paired with the loudspeaker
arestored automatically on the loudspeaker.
Note -connection impaired
After the loudspeaker and device have been paired,
aconnection is established automatically.Ifthe
Bluetooth
®
connection is not established automatical
ly
,
check the following:
Check the
Bluetooth
®
settings of your device to
see whether SIRIUM2000AMBT/SIRIUM2100AMBT
is connected. If not, repeat the steps listed under
Bluetooth
®
pairing.
Check that your device and the loudspeaker are
less than 10 metres apart. If not, move them closer
together.
Check whether obstacles areimpairing the range.
If so, move the devices closer together.
7.2 Terminating the
Bluetooth
®
connection
Change to adifferent mode to terminate the
Bluetooth
®
connection between the loudspeaker and the device.
Alternatively,you can terminate the connection manually
on your device.
8. Connection via Auxiliary In /Auxiliary Out
Youcan connect mobile devices (such as smartphones,
tablet PCs, MP3 players, etc.) and older analogue sources
(CD/DVD player,etc.) to the loudspeaker via the analogue
audio input and play their audio signal via the loudspeaker.
Here, you have the option to connect via a3.5 mm audio
cable (jack cable).
Further loudspeakers can be connected via the analogue
audio output (5), via which the audio signal is also played.
Note
Switch the loudspeaker off beforeconnecting
adevice to it.
Do not bend or crush the cable.
Forplayback via the AUX-In socket, connect your device
via the AUX-In socket (4) using a3.5 mm audio cable
(jack cable) to the loudspeaker and select AUX mode.
Forplayback via the AUX-Out socket, connect further
loudspeakers /anamplier,for example, via the AUX-Out
socket (5) using a3.5 mm audio cable (jack cable) to the
loudspeaker and select AUX mode.
Press [POWER] (1) to switch on the loudspeaker.
Activate AUX mode by repeatedly pressing the [SOURCE]
button (2) on the loudspeaker.
The status LED (4) lights up cyan when AUX mode has
been selected.
Start and control audio playback accordingly via the
connected device.
Alternatively,press [LINE IN] (14) on the remote control.
9. Connection via Optical-IN
The loudspeaker's digitalaudio input allowsyou to connect
your device (e.g. TV) and play its audio signal via the
loudspeaker.
Note
Switch the loudspeaker off beforeconnecting adevice
to it.
Beforeconnection, remove the safety caps from both
ends of the optical signal cable.
Do not bend or crush the cable.
Forplayback via the optical audio connection, connect
an optical signal cable to the optical audio input on the
loudspeaker and to the optical audio output on your
device, and then select Optical mode.
Press and hold [POWER] (1) for approximately 3seconds
to switch on the loudspeaker.
Activate Optical mode by repeatedly pressing the
[SOURCE] button (2) on the loudspeaker.
The Optical status LED (4) lights up purple when Optical
mode is active.
Alternatively,press [OpticalIN] (12) on theremotecontrol.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama SIRIUM2100AMBT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama SIRIUM2100AMBT in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hama SIRIUM2100AMBT

Hama SIRIUM2100AMBT User Manual - German - 20 pages

Hama SIRIUM2100AMBT Quick start guide - All languages - 126 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info