723724
14
Zoom out
Zoom in
Previous page
1/126
Next page
6
7.Connection via Optical-IN
The loudspeaker's digital audio input allows you to
connect your device (e.g. TV) and play its audio signal via
the loudspeaker.
Note
Switch the loudspeaker off beforeconnecting adevice
to it.
Beforeconnection, remove the safety caps from both
ends of the optical signal cable.
Do not bend or crush the cable.
Forplayback via the optical audio connection, connect
an optical signal cable to the optical audio input on the
loudspeaker and to the optical audio output on your
device, and then select Optical mode.
Press and hold [POWER] (1) for approximately 3seconds
to switch on the loudspeaker.
Activate Optical mode by repeatedly pressing the
[SOURCE] button (2) on the loudspeaker.
The Optical status LED (4) lights up purple when Optical
mode is active.
Alternatively,press [Optical IN] (12) on the remote
control.
8.Connection via Auxiliary In /Auxiliary Out
Youcan connect mobile devices (such as smartphones,
tablet PCs, MP3 players, etc.) and older analogue
sources (CD/DVD player,etc.) to the loudspeaker via the
analogue audio input and play their audio signal via the
loudspeaker.Here, you have the option to connect via a
3.5 mm audio cable (jack cable).
Further loudspeakers can be connected via the analogue
audio output (5), via which the audio signal is also played.
Note
Switch the loudspeaker off beforeconnecting adevice
to it.
Do not bend or crush the cable.
Forplayback via the AUX-In socket, connect your device
via the AUX-In socket (4) using a3.5 mm audio cable
(jack cable) to the loudspeaker and select AUX mode.
Forplayback via the AUX-Out socket, connect further
loudspeakers /anamplier,for example, via the AUX-
Out socket (5) using a3.5 mm audio cable (jack cable)
to the loudspeaker and select AUX mode.
Press [POWER] (1) to switch on the loudspeaker.
Activate AUX mode by repeatedly pressing the [SOURCE]
button (2) on the loudspeaker.
The status LED (4) lights up cyan when AUX mode has
been selected.
Start and control audio playback accordingly via the
connected device.
Alternatively,press [LINE IN] (14) on the remote control.
9.Factory reset
To reset the loudspeaker to the factory default settings
(delivery condition), proceed as follows:
Press and hold the [SETUP] (2) and [Action] (4) buttons
for around 6seconds to reset the loudspeaker to the
factory default settings.
Once the loudspeaker has been reset, it restarts.
Note
Resetting to the factory default settings can solve
some problems and malfunctions.
However,all settings made previously,such as
equaliser presets, favourites and network proles,
arepermanently deleted.
10.Care and Maintenance
Only clean this product with aslightly damp, lint-free
cloth and do not use aggressive cleaning agents.
If you do not use the product for along time, turn off
the device and disconnect it from the power supply.
Storeitinaclean, dry place out of direct sunlight.
11.Warranty Disclaimer
Hama GmbH &Co. KG assumes no liability and provides
no warranty for damage resulting from improper
installation/mounting, improper use of the product or from
failuretoobserve the operating instructions and/or safety
notes.
12.Service and Support
Please contact Hama Product Consulting if you have any
questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
The complete instruction manual is available at:
www.hama.com->00054881->Downloads
www.hama.com->00054882->Downloads
www.hama.com->00054886->Downloads
www.hama.com->00054887->Downloads
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama SIRIUM2100AMBT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama SIRIUM2100AMBT in the language / languages: All languages as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hama SIRIUM2100AMBT

Hama SIRIUM2100AMBT User Manual - English - 20 pages

Hama SIRIUM2100AMBT User Manual - German - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info