723723
13
Zoom out
Zoom in
Previous page
1/126
Next page
5
Open the Amazon Alexa App and if necessary re-enter
your access details. Youshould then nd the loudspeaker
in your active devices.
Then adjust your personalised settings (time zone,
device name, etc.) in the Amazon Alexa app. Further
information on this can be found at www.amazon.com
-> Help and Customer Service.
Note
If the Amazon Market App has already been installed
and set up on your smartphone, some smartphones
will take the user data directly from the App.
To set up anew Amazon account, log out and repeat
the steps described in this section.
Note Alexa Push to talk/ Function Key
Brieypress the [Action] button (4)onthe loudspeaker
to activate Alexa during audio modeorhigher volume.
Alternatively,press the [Action] button (3) on the
remote control.
Press the [Microphone Mute] button (3) to switch the
microphone off.Ifthe microphones aredeactivated,
the status LEDs (1-5) light up solid red. Alternatively,
press the [Microphone Mute] button (4) on the remote
control.
The loudspeaker will now no longer respond to the
activation worduntil the microphones arereactivated.
Press the [Microphone Mute] button (3) again to
reactivate the microphone. Alternatively,press the
[Microphone Mute] button (4) on the remote control.
The status LEDs (1-5) go out.
6.Bluetooth pairing
Youcan pair your terminal device with the speaker via
Bluetooth and use the speaker as aplayback device for
audio signals. Playback is controlled directly via the device
or the remote control. The volume can also be controlled
directly on the speaker.
Note
Bluetooth
®
Check whether your mobile device (smartphone,
tablet, etc.) is
Bluetooth
®
-capable.
Note that the maximum range for
Bluetooth
®
is
10 metreswithout obstacles such as walls, people,etc.
The
Bluetooth
®
connection may be disrupted by other
Bluetooth
®
devices/connections in the vicinity.
It is only possible to connect the speaker to one
terminal device.
Note that compatibility depends on the supported
Bluetooth
®
proles as well as the
Bluetooth
®
versions
being used. (See Technical specications, operating
instructions of the terminal device in use)
Ensurethat your Bluetooth-enabled device is switched
on and that Bluetooth is activated.
Activate Bluetooth mode by repeatedly pressing the
[SOURCE] button (2) on the loudspeaker.
Alternatively,press [Bluetooth] (13) on the remote
control.
The Bluetooth status LED (4) starts to pulse blue.
Press and hold the [SOURCE] button (2) for around
2seconds to activate pairing mode. The Bluetooth status
LED (4) starts to ash blue and asignal tone sounds.
Open the Bluetooth settings on your terminal device and
wait until Hama SIRIUM2000AMBT/SIRIUM2100AMBT
appears in the list of Bluetooth devices found.
If necessary,start searching for Bluetooth devices on
your terminal device.
Select the Hama SIRIUM2000AMBT/SIRIUM2100AMBT
speaker in the list of available devices and wait until the
speaker is shown as connected in the Bluetooth settings
on your terminal device.
The Bluetooth status LED (4) is now constantly lit blue.
Start and control the audio playback accordingly via the
device or remote control.
Note –Bluetooth
®
password
Some terminal devices requireapasswordinorder to
connect to another
Bluetooth
®
device.
If your terminal device requests apasswordfor
connection to the speaker,enter 0000.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama SIRIUM2000AMBT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama SIRIUM2000AMBT in the language / languages: All languages as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hama SIRIUM2000AMBT

Hama SIRIUM2000AMBT User Manual - English - 20 pages

Hama SIRIUM2000AMBT User Manual - German - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info