723727
9
Zoom out
Zoom in
Previous page
1/11
Next page
6
Note - Alexa Push to talk / function key
Briey press the [Action / Microphone mute] button
(3) on the speaker to activate Alexa during audio
operation or high volume.
Press and hold the [Action / Microphone mute] button
(3) for about 3 seconds to switch off the microphone.
The microphone status LED (3) is lit red.
The speaker will now no longer respond to the wake
word until the microphone is activated again. If the
microphone is switched off, the speaker can still be
operated using the buttons on the speaker or using
your terminal device.
10. Wireless network connection (WLAN)
Depending on the network, there are a number of ways to
connect to it.
Networks that support connection via WPS (Wi-Fi Protected
Setup) are identied in the list as [WPS].
Other connections are either open networks or connections
protected with a PSK, or Pre-Shared-Key.
WPS-/PSK-/ open network connection
WPS allows simple and nevertheless protected connection
of the radio to the network. Two options are available
for this purpose: The connection can be set up by means
of PBC, or Push-Button Con guration, or by the PIN
procedure, in which the web interface of your router
prompts you to enter a randomly generated sequence of
numbers.
PBC setup
Press and hold the [WLAN] button (4) for about 3
seconds.
The network status LED (4) ashes white for the WPS
mode.
Press the WPS button on your router or current access
point. This can often be done using the web interface,
as well.
Consult the operating instructions of your router or
access point for details.
The network status LED (4) pulsates if the access point
is available.
Once the process has been started on the router or
access point, the speaker should be able to nd and
connect to the network.
Note
Press the [WLAN] button (4) to cancel PBC setup.
Note
Often the Pre-Shared Key is printed on the back or
bottom of the router or access point.
When entering the key, take notice of capitalisation.
Open network
Note
We recommend against establishing unsecured
connections and advise you to always protect your
network against unauthorised access.
If you plan to use an open network, you just have
to select the network ID from the list of available
networks and conrm. The radio then connects
immediately to the network.
11. Activate pairing mode / connection to another
home network
Press and hold the [WLAN] button (4) for about 5
seconds. The network status LED (4) pulsates.
The speaker can now be connected to a new network (as
described in Section 6.2).
12. Music player (UPnP)
This operating mode enables the playback of MP3,
WMA or FLAC les stored on a PC, data medium or local
network.
Playback from a smartphone/tablet
Note
Only audio les stored on your smartphone/tablet can
be played back through the speaker.
Open the Hama Smart Audio app on your smartphone/
tablet.
Select the Hama SIRIUM1400ABT speaker in the device
list.
Select ‘Local Content’.
Select the audio le you wish to play through the
speaker.
13. Internetradio
Note
The Internet radio function can be called up and
controlled via Alexa. Further information can be found
at www.amazon.co.uk -> Help and Customer Service.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama SIRIUM1400ABT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama SIRIUM1400ABT in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hama SIRIUM1400ABT

Hama SIRIUM1400ABT User Manual - German - 12 pages

Hama SIRIUM1400ABT User Manual - Dutch - 12 pages

Hama SIRIUM1400ABT User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info