607403
5
Zoom out
Zoom in
Previous page
1/44
Next page
89
•To stop the alarm early, move the ALARM ON/OFF slide switch (4) to the OFF
position to the right until the surface underneath the slide switch is black. The alarm
is now deactivated.
•Move the ALARM ON/OFF slide switch (4) back to the ON position on the left
again to activate the alarm for the next day.
Note Snooze function
•While the alarm signal is sounding, press the SNOOZE/LIGHT button (7) to
activate the snooze function. Zz begins to ash on the display (1). The alarm
signal will be stopped for 5 minutes, after which it will sound again.
•The snooze function can be activated four consecutive times.
5.5. Temperature display
•Press and hold the WAVE button (10) for approx. 2 seconds to switch the
temperature display (B 6) between °C and °F.
•This is only possible if the OFF/US/UK/DE/JP slide switch (12) is set to the US, UK
or DE position.
•If the measured values are outside the measurement range, the temperature display
(B 6) will show Lo (< -40 °C/-40 °F) or HI (> 70 °C/158 °F).
5.6. Backlight
•If you press the SNOOZE/LIGHT button (7), the display (1) will light up for approx.
5 seconds.
•The alarm clock is equipped with a twilight sensor (8) that automatically switches
on the backlight of the display (1) to a dimmed setting as soon as it gets dark.
•During the day or if there is enough light, the twilight sensor (8) automatically
switches off the dimmed backlight on the display (1).
•Move the
ON/OFF slide switch (9) to the ON or OFF position to activate or
deactivate the twilight sensor (8).
Note Day of the week
•You can choose from English (GB), French (FR), German (DE), Spanish (ES) and
Italian (IT) for the display of the day of the week.
5.4. Alarm
Setting the alarm time
•Press and hold the button (3) for approx. 2 seconds until the hours display (B
10) begins to ash.
•Set the following information in the order listed:
•Hours
•Minutes
•To select the individual values, press the button (5) or the button (6) and
conrm your selection by pressing the button (3).
•If you do not make an entry for 30 seconds, the device automatically exits the
settings mode and the settings you made are saved.
•Press the button (3) to display the set alarm time for approx. 5 seconds.
Activating/deactivating the alarm
•Move the ALARM ON/OFF slide switch (4) to the left to the ON position. A red
surface will be visible underneath the slide switch.
•The alarm is activated and the alarm clock icon (B 12) is shown on the display (1).
•Move the ALARM ON/OFF slide switch (4) to the OFF position to the right until the
surface underneath the slide switch is black.
•The alarm is deactivated and the alarm clock icon (B 12) disappears from the
display (1).
Stopping the alarm/snooze function
•If the alarm is activated, it is triggered at the set time and an alarm signal sounds
for one minute. The alarm automatically stops after this time and is then triggered
again the next day at the set alarm time.
Alarm time (B 10)
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama RC150 - 123189 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama RC150 - 123189 in the language / languages: English, German, Dutch, French, Polish, Spanish as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info