607740
7
Zoom out
Zoom in
Previous page
1/17
Next page
14
Switch microphone back on (after
muting)
Press the “Volume up” button briefl y.
Switch loudspeaker back on (after
muting)
Press the “Volume down” button
briefl y.
Conference telephony
Please note that this function is generally not supported. This depends on your
provider. If this function is supported, the following features are available:
Press the call/call-ending and “Volume up” buttons simultaneously to switch
from the waiting call to the active call.
Press the “Volume up” and “Volume down” buttons simultaneously to change
the priority between the active call and the waiting call.
Press the call/call-ending and “Volume down” buttons simultaneously to end a
standby call.
TTS mode (Text to Speech)
The “Pulsar” Bluetooth system supports TTS mode (Text to Speech). During an
incoming call, the number of the caller is signalled acoustically, e.g. the hands-
free function of the system “speaks” the number of the caller digit for digit.
To switch to TTS mode, during an incoming call or while in standby mode, press
one of the two volume control buttons briefl y. TTS mode is activated. To
deactivate TTS mode, during an incoming call or while in standby mode, press
one of the two volume control buttons briefl y. TTS mode is deactivated.
Reminder function for missed calls
In the case of a missed call, you will receive a reminder signal every 20 seconds.
If you would like to switch off the reminder function, press the call/call-ending
button or one of the volume control buttons.
15
Behaviour mode
You can select either melodic or non-melodic message mode. To select “
melodic”, press and hold the “Volume up” button for 3 seconds during an
incoming call. To switch to “non-melodic”, press and hold the “Volume down”
button for 3 seconds.
Volume control
You can control the volume of music playback and during hands-free operation
independently using the volume control buttons.
Vibration function
Incoming calls are signalled discreetly by the vibration function. Three
consecutive vibration signals indicate that a connection is unavailable.
Registration and safety certifi cation/general information
This device bears the CE marking as specifi ed by the provisions of Directive
R&TTE (1999/5/EC).
Hama GmbH & Co. KG hereby declares that this device is in compliance with the
basic requirements and other relevant guidelines and regulations of the 1999/5/EC
guideline. You will fi nd the declaration of conformity in the Internet at
http://www.hama.com.
00092473bda.indd 14-1500092473bda.indd 14-15 05.02.2009 13:32:26 Uhr05.02.2009 13:32:26 Uhr
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama Pulsar - 92473 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama Pulsar - 92473 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info