723757
22
Zoom out
Zoom in
Previous page
1/28
Next page
18
15.2.3 Manual configuration of network connection
wireless (WLAN) and wired (LAN)
To manually con gure the network connection, proceed
as follows:
Press and hold
[ ] [ ]
System settings
Network
Manual settings
Manual conguration wireless (WLAN)
DHCP enable
Select the option Wireless.
Select the option DHCP enable.
In the input screen, enter the whole SSID (network name)
and then conrm with OK.
Now choose the security standard used by the network.
This can be found in the con guration options of your
router or access point.
Depending on the encryption used, you may need
to enter the network key before the connection is
established.
Manual conguration wireless (WLAN)
DHCP disable
The method described here assumes the DHCP server
is active (manual wireless conguration (WLAN)
DHCP enable). However, the network information such
as IP address, subnet mask, gateway address, and DNS
(primary and secondary) must still be entered. Find this
information in the web interface of your router or access
point, or ask your network administrator. Once all the
information has been entered correctly, conrm to proceed.
The radio now attempts to establish the connection.
15.2.4 View settings
Here you can nd all the most important information
about all network connections currently used or congured
on the radio, such as: MAC address, WLAN region, DHCP
active/ disabled, SSID, IP address, subnet mask, gateway
address, DNS (primary and secondary), etc.
Press and hold
[ ] [ ]
System settings
Network
View settings
15.2.5 Network profile
The radio automatically saves all successfully connected
network proles.This means that re-establishing these
connections (for example, after the radio was disconnected
from the power supply) does not require you to re-enter
the network access information.
To remove network proles individually, proceed
as follows:
Press and hold
[ ] [ ]
System settings
Network
Network prole
Select a network prole and press
[VOLUME/ENTER/NAVIGATE] to delete it.
Conrm the prompt querying if you want to
delete the prole with YES.
A prole that is currently active, or that is in
use, cannot be deleted.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama IR40MBT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama IR40MBT in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hama IR40MBT

Hama IR40MBT User Manual - German - 29 pages

Hama IR40MBT User Manual - French - 31 pages

Hama IR40MBT Quick start guide - All languages - 86 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info