Manual Hama EWS500 - 75500 (page 4 of 19) (English, German, Dutch, French, Polish, Turkish, Spanish)

607425

Zoom out

Zoom in

1/19

Display the three

channels alternatively

FRONT VIEW

Part A- LCD

A1: Barometer Pressure Trend

A2: Weather Forecast

A3: Indoor Temperature.

A4: Real Time Display.

A5: Moon Phase Selected Channel

A6: Outdoor channel

A7: Outdoor Temperature Trend

A8: Outdoor Temperature

A9: Indoor Humidity

A10: Alarm icon

Part B- Buttons

B1: “ALARM” button

B2: “+(12/24)” button.

B3: ”SNOOZE/LIGHT” button

B4: “- (°C/°F)” button

BACK VIEW

B5: “MODE” button

B6: “MAX/MIN “ button

B7: “WEATHER” button

B8: “CHANNEL” button

B9: “RESET” button

Part C- Structure

C1: Wall Mount Hole

C2: Battery Compartment

C3: Stand

Thermo Sensor Unit Appearance.

FRONT VIEW BACK VIEW

D1: Transmission Indication LED

D2: Outdoor Temperature

D3: Wall Mount Hole

D4: Channel Select Switch

D5: Battery Compartment

D6: °C/°F” button

D7: “TX” button

D8: Stand

D9: Temperature Sensor Probe Plug and Jack

Set Up:

• Insert batteries.

• Use a pin to press the RESET (B9) button

Weather Forecast Function:

• After you have inserted the batteries or pressed the

“WEATHER” button (B7) for 3 seconds, the weather icon starts

to ﬂ ash (A2). Enter the current weather pressing “- “ (B4)

buttons. Press “ + “ (B2) button to conﬁrm the setting. The

weather forecast may not be accurate if the current weather

entered is not correct.

• The current weather status should be entered again if the

altitude of the Main Unit is changed. ( Barometric pressure is

lower at higher altitudes. Therefore, altitude change will affect

the weather forecast). The weather station will start the ﬁ rst

forecast 6 hours after the current weather status is entered.

• 5 different weather symbols indicate the weather forecast.

These symbols stand for the weather forecast.

means Sunny .

means Slightly Cloudy.

means Cloudy.

means Rainy

g Operating Instruction

means Cloudburst.

• If there is any inconsistency of weather forecast between

Local Weather Station and this unit, the Local Weather

Station’s forecast should prevail. We will not be held

responsible for any trouble that may come up due to wrong

forecasting from this unit.

• The trend pointer displayed on the LCD (A1) indicates the

trend of the Barometric pressure.

indicates the barometric pressure trend is

increasing.

indicates the barometric pressure trend is

steady.

indicates the barometric pressure trend is

decreasing.

Outdoor Thermo Sensor Unit Registration Procedure:

• The main unit automatically starts receiving outdoor

temperature data from the Outdoor Thermo Sensor after

the batteries are inserted.

• The thermo sensor will automatically transmit temperature

data to the main unit after batteries are inserted. The battery

compartment (D5) of the thermo sensor is located behind the

back cover. To open the compartment unscrew the screws.

• If you would like to use more than one external transmitter

(Maximum3), select the Channel, CH1, CH2 or CH3 respectively

to ensure that each thermo sensor transmitts data via a

different channel. The Channel Select Switch (D4) is at the

back of the thermo sensor.

• Press “ TX “ button (D7) on the thermo sensor unit to transmit

temperature data to the main unit manually. The main unit

makes a “beep” sound as soon as it has received the

temperature data.

• Press “ °C /°F” button (D6), on the Thermo Sensor unit, to

switch between degrees Celsius or Fahrenheit on the

temperature display.

Display outdoor temperature :

• Press “ CHANNEL” button (B8) to view the 3 Channels’

temperatures. The sequence as follows:

Press Press Press

“CHANNEL” button “CHANNEL” button “CHANNEL” button

• Hold “ CHANNEL” button (B8) for 3 seconds to deactivate an

unused channel manually. It will automatically register a new

channel again if a new channel is received. If a temperature is

not displayed via an existing channel ( “- - . –“ is displayed on

the LCD ), hold “CHANNEL” button (B8) for 3 seconds to

deactivate this channel. Afterwards another signal will be

received by that channel (“Beep” sound can be heard.). Then,

press “ TX “ button (D7) on the thermo sensor unit to transmit

signal to the main unit manually

• The trend pointer displayed on the LCD(A7) indicates the trend

of the outdoor temperature.

indicates the outdoor temperature is

increasing.

indicates the outdoor temperature is steady.

indicates the outdoor temperature is

decreasing.

Maximum/Minimum Temperature/Humidity recording function:

• Press “MAX/MIN” button (B6) to show the maximum or

minimum of indoor/outdoor Temperature and indoor Humidity.

is shown on the LCD if maximum Temperature/

Humidity is shown.

is shown on the LCD if minimum Temperature/

Humidity is shown.

• Hold “MAX/MIN” button (B6) for 3 seconds to clear the

recorded maximum and minimum reading.

Thermometer:

• Press “-(°C / °F)” button (B4) to select Indoor/Outdoor

Temperature in Celsius mode/ Fahrenheit mode.

• If the temperature is out of the measurable range, LL.L

(beyond the minimum temperature) or HH.H (beyond the

maximum temperature) will be shown on the LCD.

The use of 1.5m cord Temperature Probe:

• Insert the probe plug (D9) to the jack on the right hand side

of the Thermo Sensor Unit.

• Put the metal casing outside and leave the Thermo Sensor

Unit in an indoor area to avoid freezing up the battery when

the outdoor temperature is below -20 °C.

• Always use the temperature probe to sense the temperature

when the temperature is between the following range:

-50 °C ~ 0°C and +50°C ~ + 70°C

Time Setting:

• Hold “MODE” button (B5) for 3 seconds to enter Clock/

Calendar setting Mode .

• Press “+” (B2) or “-” (B4) buttons to adjust the setting and

press “MODE” button (B5) to conﬁrm each setting.

• The setting sequence is as follows: Hour, Minutes, Second,

Year, Month/Day sequence, Month, Day, Time Zone, Day- of-

week language.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hama EWS500 - 75500 in the language / languages: English, German, Dutch, French, Polish, Turkish, Spanish as an attachment in your email.

The manual is 0,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hama EWS500 - 75500 Manual

Product: