Manual Hama EWS2020 - 92651 (page 8 of 34) (English, German, Dutch, French)

607471

Zoom out

Zoom in

1/34

DCF 77 RADIO CONTROLLED CLOCK

The radio-controlled time is calculated by the Cesium

Atomic clock of Braunschweig (ofﬁ cial clock of

Germany). Then the time is coded and transmitted from

Mainﬂ ingen – near Frankfurt – via a signal on DCF-77

(77.5 kHz). The transmitting range of the signal is 1500 km,

which means that most of Western and Central Europe

is covered by this signal. Within this range the received

time is completely accurate. However, there are many

environment factors may affect the RCC reception, i.e.

nearby computer monitors or other electronic devices,

put on any metal surface, surrounded by any tall buildings

and so on. The user had better to place the atomic clock

near the window and face the transmitter in Mainﬂ in-

gen near Frankfurt, Germany. And then check the RCC

strength indicator in the clock display to see if there has

any wave above the reception tower. There have 3 wave

icons ﬂ ash to indicate 4 levels of RCC signal status:

Very weak Weak Medium Strong

If there has no wave above the reception tower that

means the signal is very weak and the clock can not be

set by the RCC signal, please try to rotate the unit or other

windows to seek for a better RCC reception location.

Besides, the RCC signal is the strongest at night, the

user can manually set the clock to local time and leave

it overnight to receive the RCC signal.

If nothing else works, take the clock outdoors after dark

at night, remove and re-install the batteries and leave it

overnight to force it to look for the radio controlled time

signal. If the clock works outdoors but not indoors, you

probably have a local interference problem inside your

house or building.

Once the time signal is received, the wave icon will stay

on the LCD, and time and calendar will automatically be

updated.

Note:

During 10 minutes of time signal reception, all manual

settings will be suspended. If setting is desired, press

once [ ] key to deactivate the reception. You can also

press and hold the same key for 3 seconds to manually

activate the reception in normal mode. The clock will

work as a normal quartz clock if it can’t receive the RCC

signal.

SET THE CLOCK, CALENDAR & LANGUAGE

1. In clock time display mode, press & hold [ CLOCK ]

button for 2 seconds to enter clock setting mode.

Flashing 24 hours will appear.

2. Press [ ] or [ ] button to switch between 24 hours

and 12 hours format, and then press [ CLOCK ] button

to conﬁ rm.

3. The hour digits will ﬂ ash. Use the [ ] button to

increase by one hour or [ ] button to decease by one

hour to your desired hours. Holding down either button

will change the increment unit rapidly. Press [ CLOCK ]

button to conﬁ rm.

4. The minute digits will ﬂ ash. Use the [ ] button or

[ ] button to set your desired minutes. Holding down

either button will change the increment unit rapidly.

Press [ CLOCK ] button to conﬁ rm.

NOTE: Every change of minute digit will automatically

reset the seconds to zero.

5. The year digit will ﬂ ash and Yr icon appears. Press

[ ] or [ ] button to set your desired year.

Press [ CLOCK ] button to conﬁ rm.

NOTE: Year range is from 2000 to 2099.

6. D and M icons will ﬂ ash. Press [ ] or [ ] to select

D M (Date Month) or M D (Month Date) format.

Press [ CLOCK ] button to conﬁ rm.

7. Month digits will ﬂ ash. Press [ ] or [ ] button

to set your desired month. Press [ CLOCK ] button to

conﬁ rm. Do the same to set Date.

NOTE: The moon phase and the weekday will be

automatically calculated and displayed

for the date set above.

8. E digit will ﬂ ash. Press [ ] or [ ] button to switch

5 languages display of weekday (English/German/

French/Spanish/

Italian.

See table 1).

Press [ CLOCK ]

button to conﬁ rm

and exit setting

mode

Table 1

NOTE: If no key press during setting mode for

10 seconds, it will automatically keep the

setting and exit to normal display.

TO SET DAILY ALARM

1. In clock time display mode, press [ CLOCK ] button

triple time to switch to display alarm for ever.

In clock time display mode, press once [ CLOCK ] button

to switch HR:MIN sec => HR:MIN week => DAY MON

year => ALARM time (HR:MIN sec).

If user don’t press [ CLOCK ] button it will always

display alarm time.

2. Press and hold [ CLOCK ] button for 2 seconds to enter

alarm setting mode.

3. The hour digits will ﬂ ash, use [ ] button to increase by

one hour or [ ] button to decease by one hour

to your desired hours. Holding down the button will

change the increment unit rapidly. Press [ CLOCK ]

button to conﬁ rm.

4. The minute digits will ﬂ ash. Use [ ] button to

increase by one minute or [ ] button to decease

by one minute to your desired minutes. Holding down

the button will change the increment unit rapidly.

Press [ CLOCK ] button to conﬁ rm and ﬁ nish the

setting.

5. When alarm is beeping, wave hand in front of the IR

sensor to snooze for 5 minutes. Press [ CLOCK ] [ ],

[] or [ CITY ] button to stop the alarm for a day.

MOON PHASE

Our weather station is equipped with 8 moon phases

display (i.e. from new moon to waning crescent)

on the screen.

• The animated rolling moon phase will pause 5 seconds

in the place of the current moon phase calculated by

the current calendar date.

• The user also can press [ ] button or [ ] button go

through the calendar to check the moon phase for a

speciﬁ c date other than the current date.

SUN POSITION, MOON POSITION, SUNRISE

and SUNSET TIME

The weather station will automatically calculate the sun

position, moon position, sunrise and sunset time based on

the input city location and the set data.

WEATHER FORECAST

Sunny Rainy

Slight Cloudy Stormy

Cloudy Snowy

Our weather station is capable of detecting local barome-

tric pressure changes, and based on the data collected,

can predict the weather for the next 12 to 24 hours.

NOTE:

1. The accuracy of a general pressure-based weather

forecast is about 70 to 75%, and therefore, we cannot

be held responsible for any inconveniences so caused

by an inaccurate one.

2. The weather forecast is meant for the next 12 to

24 hours. It may not necessarily reﬂ ect the current

situation.

3. The ‘Sunny’ forecast covering night hours indicates

clear weather.

New Moon

Last QuarterFirst Quarter

Waxing Crescent

Waning Crescent

Waxing Gibbous

Waning Gibbous

Full Moon

00092651bda.indd 14-15

19.06.2009 11:09:43 Uhr

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hama EWS2020 - 92651 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hama EWS2020 - 92651 Manual

Product: