723728
21
Zoom out
Zoom in
Previous page
1/25
Next page
18
13.1.3 Manual configuration of network connection
wireless (WLAN)
To manually congure a network connection, proceed
as follows:
Press [ ] (4) to go to the system settings.
Use [NAVIGATE/ENTER/VOLUME] to navigate to the
"Network" menu item.
Conrm the selection by pressing [NAVIGATE/
ENTER/VOLUME].
Use [NAVIGATE/ENTER/VOLUME] to navigate to the
"Manual settings" menu item.
Manual conguration wireless (WLAN) DHCP enable
Select the option "Wireless".
Selection the option "DHCP enable".
In the input screen, enter the whole SSID (network name)
and then conrm with the OK button.
Now choose the security standard used by the network.
This can be found in the conguration options of your
router or access point.
Depending on the encryption used, you may need
to enter the network key before the connection
is established.
Manual conguration wireless (WLAN) DHCP disable
This method corresponds to conguration with an active
DHCP server (manual conguration wireless (WLAN) -
DHCP enable), however you must also enter the network
information such as the IP address, subnet mask, gateway
address and DNS (primary and secondary).
Find this information in the web interface of your router
or access point, or if this information is already correctly
entered, you can conrm the entry. The radio now attempts
to establish the connection.
13.1.4 View settings
This is where you will nd all of the key information about
all network connections that the radio is currently using,
or which have been set up, e.g.: MAC address, WLAN
region, DHCP enable / disable, SSID, IP address, subnet
mask, gateway address, DNS (primary/secondary), etc.
Press [
] (4) to go to the system settings.
Use [NAVIGATE/ENTER/VOLUME] (9) to navigate to
the "Network" menu item.
Conrm the selection by pressing [NAVIGATE/
ENTER/VOLUME].
Use [NAVIGATE/ENTER/VOLUME] to navigate to the
"View settings" menu item.
13.1.5 Network profile
The radio automatically saves all successful network
connections (proles). This means that re-establishing
these connections (for example, after the radio was
disconnected from the power supply) does not require you
to re-enter the network access information.
To remove network proles individually, proceed as follows:
Press [
] (4) to go to the system settings.
Use [NAVIGATE/ENTER/VOLUME] (9) to navigate to
the "Network" menu item.
Conrm the selection by pressing [NAVIGATE/
ENTER/VOLUME].
Use [NAVIGATE/ENTER/VOLUME] to navigate to the
"Network prole" menu item.
Select a network prole and press [NAVIGATE/
ENTER/DELETE] to remove it.
Conrm the prompt querying if you want to delete
the network prole with YES.
A prole that is currently active, or that is in use,
cannot be deleted.
Note
Before giving or selling the radio to someone else,
we recommend performing a factory reset.
This will completely and permanently delete all
network information and connections stored on
the device.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama DIR3020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama DIR3020 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hama DIR3020

Hama DIR3020 User Manual - German - 25 pages

Hama DIR3020 Quick start guide - All languages - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info