723748
9
Zoom out
Zoom in
Previous page
1/84
Next page
3
Risk of electric shock
Do not open the device or continuetooperate it if it
becomes damaged.
Do not use the product if the ACadapter,adapter
cable or power cable is damaged.
Do not attempttoserviceorrepair the device
yourself.Leave any service work to qualied experts.
4. Mounting and getting started
This product is supplied with amount for vehicle
ventilation holesand aself-adhesive mount for at
surfaces.
Warning
Makesurethat any cables for power supply and
antenna connection do not affect driving safety.
4.1 Antenna connection/alternative solutions
(pic. D)
Note
To optimise reception, the glass adhesiveantenna
should be ttedsuch that it is in contact with the
vehicle body.
If your vehicle’s Apillar is coveredwith fabric or other
insulatingmaterial, tthe metalfoil thereanyway.
Consult alocal car workshop regarding the antenna’s
contact with the vehicle body.
Fit the antenna at the edge of the windscreen (preferably
on the passenger side) and connectthe metal foil to
your vehicle’sApillar.
Then connectthe SMB connector of the antenna cable
to the antenna input (14)ofthe adapter.
4.2 Mounting
Warning –Risk of injury
Take carethat components such as airbags, safety
areas, controls, instruments, etc. and visibility arenot
blocked or restricted.
Do not allowyourself to be distracted by the product,
for example when driving avehicle or operating
sports equipment. Always pay attention to the
surrounding tracand your environment.
Note
Beforemounting the holder,check the installation
optionsin your vehicle. If in doubt, consult the
manual for yourvehicleorcontact the manufacturer.
Strictly avoid usingundue force whenusing the
productorduringinstallation.
A) Mounting to ventilation grille
Fit the mounting adapter for ventilationapertures to the
back of the product. (FigureA)
Now insert the device into the ventilationgrille.
The peg for the mount in the ventilationgrille can be
turned 360° so thatyou can adjust alignment.
B) Mounting using the adhesive pad
Note –Mounting surface
Please note thatthe selected mountingsurface (e.g.
dashboard) should be free of dust and grease. Use a
suitable cleaningagent from aspecialised dealer to
clean the surface.
Fit the mounting adapter with the adhesive pad to the
back of the product (FigureB).
Clean the surface to which the adhesive pad is to be
axed.
Now removethe protective lm from the adhesive pad
and mount the adapter on the chosen surface.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama CDR70BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama CDR70BT in the language / languages: All languages as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hama CDR70BT

Hama CDR70BT User Manual - English - 19 pages

Hama CDR70BT User Manual - German - 19 pages

Hama CDR70BT User Manual - French - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info