Manual Hama 62747 Wireless LAN Router NAS (page 9 of 17) (English)

607689

Zoom out

Zoom in

1/17

WPA pre-shared-key (recommended for most users)

First select whether you want to use WPA with TKIP

encryption algorithm, WPA2 with AES encryption algo-

rithm or the WPA Mixed mode. The mixed mode allows

clients using WPA or WPA2 to access the access point.

The mixture is very practical as presently few XP clients

are WPA2 compatible. If the mixed mode is switched off,

the AP only allows WPA2 clients, and the large number

of WPA (TKIP) devices cannot connect.

Then you must select the key format (Pre-shared Key

Format). Select either Pass phrase for a key with a

length of at least 8 and max. 63 characters, whereby let-

ters (A-Z), numbers and punctuation marks can be used,

or Hex for a 64 character key, in which only numbers

from 0-9 and letters from a-f can be used.

The next step is entering a key, called a pre-shared-key

(PSK). All clients which are to access the access point

must know this character string.

Click Apply to save your settings. You must then restart the router for the settings to take effect. To do so, click Apply in the next

window. The wireless network with encryption is available after you restart.

WPA RADIUS (requires a special authentication server)

First select whether you want to use WPA with TKIP encryption algorithm, WPA2 with AES encryption algorithm or the WPA Mixed

mode. The mixed mode allows clients using WPA or WPA2 to access the access point. The mixture is very practical as presently few

XP clients are WPA2 compatible.

Select WPA2 (AES) only. The AP only allows WPA2 clients, and the large number of WPA (TKIP) devices cannot connect.

Next enter the RADIUS server IP address. The RADIUS Server Port is preset to 1812. Enter the password for the RADIUS Server.

Click Apply to save your settings. You must then restart the router for the settings to take effect. To do so, click Apply in the next

window. The wireless network with encryption is available after you restart.

3.2.3 Setting the Encryption for Bridge-Point to Point, Bridge Point to Multi-Point and Bridge WDS

First, it is important to understand a range of terms. The next section will explain the main terms used here:

Authentication: Authentication is a process in which the identity, e.g. of a person is determined based on a certain characteristic.

This can be done by ﬁ ngerprint, password or any other proof of authorisation.

Encryption: Encryption is a process in which plain text is transformed into a coded text via an encryption process (algorithm). One or

more codes can be used for this. It must also be mentioned that each individual encryption process offers one or more authentication

options.

The following encryption types are available for the various modes:

• 64 Bit and 128 Bit WEP encryption

• WPA (TKIP) and WPA2 (AES) encryption

Click the Set Security button to make the settings for the Bridge-Point to Point, Bridge-Point to Multi-Point and Bridge WDS modes

after setting the mode. For the Bridge WDS mode, encryption must be set for the access point under Wireless/Security Settings

in the menu on the left. This is the only encryption available for WDS.

For WDS, the encryption must be adjusted before, in the menu on the left, under Wireless/Security Settings.

You can choose either WEP encryption with 64 Bit and 128 Bit, WPA with TKIP encryption algorithm and WPA2 with AES encryption

algorithm.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hama 62747 Wireless LAN Router NAS in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hama 62747 Wireless LAN Router NAS

Hama 62747 Wireless LAN Router NAS User Manual - German - 24 pages

Hama 62747 Wireless LAN Router NAS User Manual - Dutch - 20 pages

Hama 62747 Wireless LAN Router NAS User Manual - French - 17 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hama 62747 Wireless LAN Router NAS Manual

Product: