607689

Hama 62747 Wireless LAN Router NAS Manual

5
Zoom out
Zoom in
Previous page
1/17
Next page
6
In addition to the access data, you can make the following entries:
MTU stands for Maximal Transfer Unit and specifi es the maximum packet size to be transferred. If you are not sure about this setting,
we recommend leaving the standard value set. Values between 512 and 1492 can be set.
The Connection Type entry sets the dial-in action of your router. You can then select either:
Continuous: The router is always connected to the internet. This connection type is recommended if you have a fl at-rate with no time
limit, for example.
Connect on demand: With this connection type, the router does not dial in until it receives a request from a connected computer, e.g.
if you open the internet browser on a computer. The connection is maintained until the period set under Idle Time Out has passed
without activity.
Manual: If you choose the Manual connection type, you can make the connection by clicking Connect, and close it by clicking
Disconnect.
Note! The “Connect as required” setting is recommended for volume or timed rates, so that the internet connection is
disconnected automatically after the period set in the „idle time” option. Connection costs may be high if permanently
connected. Please also note that closing the browser does not automatically disconnect from the internet. Many programs
send queries to the internet or receive data from it without this being clearly visible. For the router, these queries are just
as valid as opening a browser, for example. If you want to ensure that there is no active connection to the internet, you
should switch off the device or disconnect it from the modem.
Idle Time Out: Enter the length of time you want to wait before internet connection is cut off when inactive. Values between 1 and
1000 can be set.
Click OK to confi rm your entries. You must then restart the router for the settings to take effect. Click Apply in the next window to
save the settings. The router takes approx. 30 seconds to restart. After the restart the router is confi gured so that you can access the
internet via the connected computers. You can also edit these settings manually, by clicking WAN in the menu on the left and then
selecting the corresponding connection type.
3.2 Confi guring the Wireless LAN
Wireless LAN is deactivated by default for security reasons. To activate this function, from the start view which can be accessed
by clicking Home, select General Setup and then Wireless in the menu on the left. Note that activating Wireless LAN without also
setting encryption results in a security risk. Select Enable and then click Apply. Read Basic Settings for Wireless Networks for further
instructions!
3.2.1 Basic Settings for Wireless Networks (WLAN)
Select Basic Settings in the menu on the left.
The Mode setting allows you can select the task the router is to perform in the network.
Select the AP (3.2.1.1) access point function if the device is the only access point in your network or if no bridge level connection is to
be made to other access points.
Select AP Bridge-Point to Point (3.2.1.2) if you want to connect this access point wirelessly to a second access point. In this mode,
clients cannot log-in via a wireless connection.
Select AP Bridge-Point to Multi-Point (3.2.1.3) if you want to connect this access point wirelessly to several other access points. In
this mode, clients cannot log-in via a wireless connection.
Select AP Bridge WDS (3.2.1.4), if you want to connect this access point to one or more other access points wirelessly and clients are
to be allowed to log in wirelessly.
Continue confi guration as required.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama 62747 Wireless LAN Router NAS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama 62747 Wireless LAN Router NAS in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hama 62747 Wireless LAN Router NAS

Hama 62747 Wireless LAN Router NAS User Manual - German - 24 pages

Hama 62747 Wireless LAN Router NAS User Manual - Dutch - 20 pages

Hama 62747 Wireless LAN Router NAS User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info