Manual Hama 62735 Wireless LAN - MiMo 300 Express (page 5 of 14) (English)

607693

Zoom out

Zoom in

1/14

Please enter the following details: User Name

Password

Service Name (this must not always be entered)

In addition to the access data, you can make the following entries:

MTU stands for Maximal Transfer Unit and speciﬁ es the maximum packet size to be transferred. If you are not

sure about this setting, we recommend leaving the standard value set. Values between 512 and 1492 can be

set.

The Connection Type entry sets the dial-in action of your router. You can then select either:

Continuous: The router is always connected to the internet. This connection type is recommended if you have

a ﬂ at-rate with no time limit, for example.

Connect on demand: With this connection type, the router does not dial in until it receives a request from a

connected computer, e.g. if you open the internet browser on a computer. The connection is maintained until

the period set under Idle Time Out has passed without activity.

Manual: If you choose the Manual connection type, you can make the connection by clicking Connect, and

close it by clicking Disconnect.

Note! The “Connect as required” setting is recommended for volume or timed rates, so that the

internet connection is disconnected automatically after the period set in the „idle time”

option. Connection costs may be high if permanently connected. Please also note that

closing the browser does not automatically disconnect from the internet. Many programs

send queries to the internet or receive data from it without this being clearly visible. For the

router, these queries are just as valid as opening a browser, for example. If you want to

ensure that there is no active connection to the internet, you should switch off the device or

disconnect it from the modem.

Idle Time Out: Enter the length of time you want to wait before internet connection is cut off when inactive.

Values between 1 and 1000 can be set.

Click OK to conﬁ rm your entries. You must then restart the router for the settings to take effect. Click Apply

in the next window to save the settings. The router takes approx. 30 seconds to restart. After the restart the

router is conﬁ gured so that you can access the internet via the connected computers. You can also edit these

settings manually, by clicking WAN in the menu on the left and then selecting the corresponding connection

type.

3.2 Conﬁ guring the Wireless LAN

Wireless LAN is deactivated by default for security reasons. To activate this function, from the start view

which can be accessed by clicking Home, select General Setup and then Wireless in the menu on the left.

Note that activating Wireless LAN without also setting encryption results in a security risk. Select Enable and

then click Apply. Read Basic Settings for Wireless Networks for further instructions!

3.2.1 Basic Settings for Wireless Networks (WLAN)

Select Basic Settings in the menu on the left.

The Mode setting allows you can select the task the router is to perform in the network.

Select the AP (3.2.1.1) access point function if the device is the only access point in your network or if no

bridge level connection is to be made to other access points.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hama 62735 Wireless LAN - MiMo 300 Express in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hama 62735 Wireless LAN - MiMo 300 Express

Hama 62735 Wireless LAN - MiMo 300 Express User Manual - German - 18 pages

Hama 62735 Wireless LAN - MiMo 300 Express User Manual - French - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hama 62735 Wireless LAN - MiMo 300 Express Manual

Product: