607693
2
Zoom out
Zoom in
Previous page
1/14
Next page
3
Note! The “Connect as required” setting is recommended for volume or timed rates, so that the
internet connection is disconnected automatically after the period set in the „Idle time”
option. Connection costs may be high if permanently connected. Please also note that
closing the browser does not automatically disconnect from the internet. Many programs
send queries to the internet or receive data from it without this being clearly visible. For the
router, these queries are just as valid as opening a browser, for example. If you want to
ensure that there is no active connection to the internet, you should switch off the device or
disconnect it from the modem.
1. Connecting the Wireless LAN Router
1. Connect the computers and other network devices such as hubs/switches to sockets 1-4.
Use a crossover or CAT5 patch cable (max. 100m). The integrated switch automatically
identifi es the connection speed of 10 or 100Mbps, half/full duplex transfer mode and the type of
cable used.
2. Connect the Ethernet port of your modem to the WAN connection on the router. A 1:1 or crossover
cable is required depending on the modem. In most cases, the existing connection cable can be
used.
3. Plug the power unit supplied into an empty socket and connect it to the router. Caution:
Unsuitable power supply units can cause damage!
Checking Installation
There are various status indicating LEDs on the top of the device:
LED Condition Status
Power Illuminated Power unit is connected and supplying electricity
Off No power unit connected, device not being supplied with electricity
WLAN Flashing Wireless LAN is activated / data is being sent
Off Wireless LAN is deactivated
WANIlluminated The WAN port has generated a correct network connection
Flashing Data transfer via WAN port
Off No connection
LAN1-4 Illuminated The corresponding LAN port has generated a correct network connection
Flashing Data transfer via respective LAN port
Off No connection
2. Confi guring the operating system and computer
The TCP/IP protocol must be installed on all PCs that will be using the Internet. By default, the
IP address 192.168.2.1 and an activated DHCP server are confi gured for the router. This means that the
connected PCs are automatically given appropriate addresses and other settings. We recommend using
these settings.
Proceed as follows to check the settings on your PC:
Start -> Settings -> Control panel -> Network connections
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama 62735 Wireless LAN - MiMo 300 Express at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama 62735 Wireless LAN - MiMo 300 Express in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hama 62735 Wireless LAN - MiMo 300 Express

Hama 62735 Wireless LAN - MiMo 300 Express User Manual - German - 18 pages

Hama 62735 Wireless LAN - MiMo 300 Express User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info