607695

Hama 62727 - WLAN Modem Router ADSL2 plus Manual

19
Zoom out
Zoom in
Previous page
1/52
Next page
36
37
6.1 ATM VC: (DSL modem setting)
Asynchronous Transfer
Mode (ATM) is a method of
transferring data whereby
the data traffi c is transferred
in small packets, and the
transfer is coded and
asynchronous. You must enter
the following values, which
differ according to the DSL connection.
Virtual Circuit: PVCO is selected by default.
Status: Activated must be selected.
VPI: 1
VCI: 32
Note: The values 1 and 32 are only valid for the Deutsche Telekom DSL connection. If your connection is through a
different company or you are not resident in Germany, ask your DSL connection provider for these values.
Click SAVE at the bottom of the window to save your settings.
6.2 Encapsulation: (DSL protocol)
The purpose of encapsulation
is to encapsulate other
protocols and to transport
these in the form of IP
tunnels.
In Germany, the PPPoE
protocol is used almost exclusively; this manual will therefore cover this protocol only. Users with different
protocols should consult their internet service provider, which will provide the relevant setting information.
Click SAVE at the bottom of the window to save your settings.
6.3 PPPoE/PPPoA: (Broadband connection protocol)
PPP over Ethernet (PPPoE)
is the use of the Point-to-
Point Protocol (PPP) with an
Ethernet connection. PPPoE
is currently used for ADSL
connections in Germany.
5 Interface Setup
In this screen, you can change the standard
LANsettings of the router.
In the Main Menu, select the Interface
Setup menu item, followed by the LAN
sub-item.
5.1 Router local IP:
The IP Address of the router is set to 192.168.2.1 by default. If you want to use a different address for the router, you
can make the necessary changes here. The corresponding IP Subnet Mask is entered in the fi eld directly below
this. All other fi elds are only relevant for specialised application areas, which cannot be explained in depth here.
We recommend that you keep the default settings.
Click SAVE at the bottom of the window to save your settings.
Warning: The new LAN configuration takes effect after restarting. You must therefore use the new IP address to
open the web interface in the browser.
5.2 DHCP Server:
The integrated DHCP server allows IP addresses to be assigned to connected clients automatically. Select
Disabled if you assign the IP addresses manually in your network, and therefore do not need a DHCP server. Select
Enabled if you want to use the DHCP server. The Lease Time setting specifi es how long the assigned IP address
is to apply for the client. The IP address range from which the DHCP server can assign IP addresses to clients is
restricted by the Start-IP Address and the End-IP Address.
Click SAVE at the bottom of the window to save your settings.
6 Internet Settings
In this screen, you can change the parameters for the integrated ADSL2+ modem in the router. In the Main Menu,
select the Interface Setup menu item, and then the Internet sub-item. The most important settings in this area are
explained below:
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama 62727 - WLAN Modem Router ADSL2 plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama 62727 - WLAN Modem Router ADSL2 plus in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info