607695

Hama 62727 - WLAN Modem Router ADSL2 plus Manual

15
Zoom out
Zoom in
Previous page
1/52
Next page
28
29
Package contents:
1x Hama Wireless LAN ADSL2+ Modem Router, 54 Mbps
1x 12 V power supply unit
1x Printed operating instructions
System requirements:
• Operating system with TCP/IP protocol installed
• Java-capable web browser such as Mozilla Firefox, Microsoft Internet Explorer or Opera.
Safety instructions:
Do not use the device in moist or extremely dusty areas, on radiators or in the vicinity of heat sources. This device
is not designed for use outdoors. Protect the device from pressure and impact. The device may not be opened or
moved during operation. Do not use the device without an antenna attached
Caution Use the router with the enclosed power supply unit only. Using other power supply units can cause
irreparable damage to the product.
Note: !! The “Connect On-Demand” setting is recommended if you have a pay-as-you-go tariff(if you pay
according to volume or time). This means that the Internet connection is disconnected automatically
after the period set in the “Idle time” option. Connection costs may be high if you are permanently
connected to the internet. Please also note that closing the browser does not automatically
disconnect you from the Internet. A number of programs send queries to the Internet or receive
data without this being clearly indicated. For the router, these queries are just as valid as opening
a browser, for example. If you want to ensure that there is no active connection to the Internet, you
should switch off the device.
Requirements for installing the HAMA WLAN ADSL2+ Modem Router, 54 Mbps:
Ensure that you have the following before installing the Hama WLAN ADSL2+ Modem Router:
1. ADSL or ADSL2+-enabled connection
2. Installed DSL splitter provided by your DSL connection service provider
3. User information from your Internet provider
4. DSL connecting cable (between the splitter and modem)
5. CAT5STP network cable with a RJ-45 connection
1 Connecting the WLAN ADSL2+ Modem Router:
1. Connect the computers and other network devices such as hubs/switches to sockets 1-4. Use a crossover
or CAT5 patch cable (max. 100 m). The integrated switch automatically detects the connection speed of 10 or
100 Mbps, half/full duplex transfer mode and the type of cable used.
2. Connect the DSL splitter to the “ADSL” connection on the rear of the WLAN ADSL2+ modem router using the
DSL connecting cable.
3. Plug the provided power supply unit into an empty socket and connect it to the router.
Caution: Unsuitable power supply units can cause damage.
Checking installation:
There are different LEDs for indicating the status on the top of the device:
LEDCondition Status
POWER IlluminatedPower supply unit is connected and supplying power
OffNo power unit connected, device not being supplied with power
WLAN device FlashingWireless LAN is activated / data is being sent
OffWireless LAN is deactivated
SYNC IlluminatedModem has successfully synchronised with the switching centre
Flashing Modem is attempting to synchronise with the switching centre
LAN 1-4IlluminatedThe corresponding LAN port has established a correct network connection
Flashing Data transfer via respective LAN port
OffNo connection
2 Configuring the Operating System and Computer
The TCP/IP protocol must be installed on all PCs that will be using the Internet. By default, the IP address
192.168.2.1 and an activated DHCP server are configured for the router. This means that the connected PCs are
automatically allocated suitable addresses and other settings. We recommend that you keep these settings.
Proceed as follows to check the settings on your PC:
On your Windows Desktop click
Start -> Settings -> Control Panel -> Network
Connections
or, with Windows Vista,
Start (Windows logo) -> Control Panel -> Network and
Internet -> Network Connections
Select the connection type (network adapter) between
your PC and the router, e.g. “LAN connection”. When
you right-click the corresponding connection, a menu is
displayed; select Properties.
Select the Internet Protocol (TCP/IP) entry in the list
and then click Properties.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama 62727 - WLAN Modem Router ADSL2 plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama 62727 - WLAN Modem Router ADSL2 plus in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info