Manual Hama 34313 Controller Quixotic (page 10 of 36) (English, German, Dutch, French, Italian, Portuguese, Spanish)

607900

Zoom out

Zoom in

1/36

Macro Button

With this button you can program a complicated move requiring many buttons. You

can recall this move by pressing a single button. See point “Programming of the

Controller” in this instruction manual.

Button Programmability:

Certain buttons of the controller can be programmed. One distinguishes between pro-

grammable and non-programmable buttons. The direction pad, right-thumb-controlled

analogue sticks as well as the buttons START and MACRO are non-programmable;

they cannot be set to any function button.

Note: The Quixotic Controller must be plugged into the GameCube console so that the

buttons can be relocated and programmed; during the programming, no games are

possible.

What does button programmability signify?

The Quixotic Controller is fully programmable. This allows you to perform on demand

special and complex moves more quickly. When playing certain games (usually figh-

ting games), a combination of function buttons executes special moves for more intri-

cate attacks. The macro function allows you to execute these complicated moves by

pressing a single button.

Three buttons can be occupied for the reproduction of set macros: L-Button, R-Button,

and Trigger (see controller diagram). In every programmed macro, up to 32 buttons

can be pressed. Pressing buttons simultaneously counts as a single command (pres-

sing X, B, and A e.g. at the same time is one command, not three commands). When

programming a button, every button pressed is registered to the pad as 100%. Your

commands must be executed within 1.5 seconds.

Programming of the controller:

1. Press the MACRO button until the MACRO LED lights up and indicates that the

programming function is active. Note: Press the START button to adjust the

executing speed of the programmed buttons. The MACRO LED flashes at two

intervals: 0.6 sec and 1.2 sec.

2. Select the button to be programmed by pressing that button(Z key or button under

digital controller) until the MACRO LED begins to flash.

3. Press the button(s) (A, B, X, Y, Trigger, L-Button, R-Button and left-thumb-controlled

analogue sticks) to be programmed into the button which was selected above.

Each button pressed during this step is acknowledged by one blink of the MACRO

LED. Note: When the maximum number of buttons for the programming (32) is

pressed, controller does not accept further inputs and the MACRO LED goes out.

4. Press the MACRO button to turn the programming function OFF when you have

assigned the desired buttons. The MACRO LED goes out.

5. Repeat the above-mentioned points to program other buttons.

00034313bda_DIN_A6 10.08.2006 16:14 Uhr Seite 11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hama 34313 Controller Quixotic in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hama 34313 Controller Quixotic Manual

Product: