Manual Hama 00176577 (page 15 of 26) (English)

791091

Zoom out

Zoom in

1/26

•Once the connection has been established, the LED stops

flashing quickly and emits a constant blue light; the app

confirms that your camera was connected. You can now

give the camera a name.

•Click ‘Finish’ to complete the process.

•Now you can attach the camera and set up, control and

configure it using the app.

•‘Screenshot’ allows you to take a snapshot.

•‘Speak’ allows you to speak via the camera.

•‘Record’ allows you to record the image currently shown

and store it in your gallery.

•‘Playback’ allows you to view past video recordings. They

are stored in encrypted form on an SD card (not included

in delivery), which must be inserted into the camera.

•‘Alarm’ allows you to access the motion detection

settings and configure them.

•‘Photo Album / Cloud Storage’ allows you to locate the

recorded images and videos.

Note - Pairing restart

Press and hold the Reset button on the back for

approximately 5 seconds until a signal tone sounds.

As soon as the LED begins to flash red, you can make

another pairing attempt.

4.7 WiFi controller for LED strips

4.7.1 Product features

Note

•Protect the product from dirt, moisture and

overheating, and only use it in a dry environment.

•Operate the product only with a mains plug that is

approved for the device, and connect it to a socket

approved for the device. The socket must be installed

close to the product and must be easily accessible.

Risk of electric shock

•Do not use damaged or unsuitable power supply units

or LED light strips.

•When changing LED light strips, always ensure that the

LED light strip in question is current-free. Switch off the

current and/or pull the mains plug.

•Do not open the product. Do not continue to operate

the product if it is damaged, which may be indicated

by smoke, odours or loud noises. Contact your dealer

or our service department immediately (see „Service

and support“).

4.7.2 Installation

•Connect the WiFi controller to an LED light strip. Make

sure that the polarity is correct: The arrow on the plug

indicates that the contact that must be connected to the

12 V contact of the LED light strip. Please also refer to

the operating instructions for the LED light strip used.

•Then connect the controller to a properly installed and

easily accessible power socket via a power supply unit.

Please refer to the operating instructions for the power

supply unit used.

Warning

•Use this product only with power supply units and

LED light strips (GRB, BRG) that are approved for

the application. To this end, check the technical

specifications of the power supply unit, LED light strip

and WiFi controller for compatibility.

•Before carrying out the installation, check that the

power supply unit and LED light strip are in perfect

technical condition.

•Please note that lights (even LEDs) can generate heat

and may become hot. Always let the light cool off for a

few minutes before touching it or changing it.

•Disconnect the product from the mains if it will not be

used for a long period of time.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hama 00176577 in the language / languages: English as an attachment in your email.

The manual is 2.15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hama 00176577

Hama 00176577 User Manual - German - 26 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hama 00176577 Manual

Product: