627527
58
Zoom out
Zoom in
Previous page
1/78
Next page
58 05-7175-00-00.fm
Maintenance and Servicing
Emptying the solution tank via the vacuum system
This method is recommended if no drain is available and the waste water tank
is empty.
1. Turn off the machine and engage the parking brake.
2. Set the adjusting lever of the fresh water metering system Fig. 19-21 to 0.
3. Turn and remove the filter cover of the fresh water filter Fig. 19-24.
4. Remove the suction hose Fig. 20-28 from the squeegee and plug it onto
the filter housing Fig. 20-A.
5. Open the adjusting lever of the fresh water metering system as far as
possible.
6. Switch on the suction turbine via button Fig. 20-35. The fresh water is
conveyed into the waste water tank.
5.4.3 Cleaning the solution tank
1. Empty the solution tank, see section 5.4.2
2. Turn and remove the cover of the maintenance opening Fig. 19-20.
3. Thoroughly clean the solution tank with a water hose.
4. After cleaning the tank, place the cover onto the maintenance opening and
screw tight.
5. After filling the solution tank, check the cover of the maintenance unit for
leak tightness. If necessary, screw the cover tighter.
Note
To facilitate loosening and closing the cover, use the supplied
handle Fig. 19-A.
Fig. 20:
35
A
28
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hako Scrubmaster B75 R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hako Scrubmaster B75 R in the language / languages: English as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info