627527
12
Zoom out
Zoom in
Previous page
1/78
Next page
12 01-7175-00-00.fm
Safety instructions
1.5 Information about special risks
Electrical system
If the electrical system is faulty, always turn off the machine and eliminate
the fault.
Work on the electrical system must be done only in accordance with
electrical engineering standards by a specialist trained for this work.
Regularly inspect/check the electrical system. Defects such as loose
connections, loose nuts of electrified bolts, electrical components or
damaged cables must be eliminated immediately.
Only use original fuses with the specified current. If stronger fuses are
used, the electrical system can be destroyed and there can be fires.
Batteries
Observe the operating manuals and safety instructions provided by the
battery manufacturer.
Never connect or disconnect batteries when the machine is turned on.
Make sure the batteries are never fully discharged; recharge them as
quickly as possible.
Only instructed maintenance personnel must handle and replace batteries.
Only batteries approved by Hako may be used at the intended position.
Danger! Make sure that the insulation of the battery cables is not damaged.
The battery cables should not rub against anything. If the insulation is
defective, no longer use the machine and have the battery cables replaced
by the Hako customer service immediately.
Caution! Always make sure that the batteries are clean and dry to avoid
creeping currents and corrosion damage. Protect the batteries, in
particular, against conductive contamination, e. g. metal dust.
Risk of short circuits and spark formation! Never place tools or other electri-
cally conductive objects on the battery!
Do not remove insulating caps and covers, if necessary re-install them after
carrying out work on the battery cables.
Caution! Explosive gases may develop when charging the batteries.
Avoid smoking, fire or naked light in the vicinity of batteries. Ensure suffi-
cient ventilation when charging the batteries.
For further safety instructions, see Hako supplementary sheet 88-60-2556
– information for drive batteries.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hako Scrubmaster B75 R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hako Scrubmaster B75 R in the language / languages: English as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info