683782
23
Zoom out
Zoom in
Previous page
1/38
Next page
Soiled and
fresh water tanks
The Hakomatic B 910 is equipped
with a soiled water tank (III/5) and a
fresh water (lye) tank (III/3).
Either tank is equipped with flexible
pane. Soiled water is fed via the suc-
tion hose through the inlet socket
(III/6) into the soiled water tank.
A floating switch in the soiled water
tank precludes overflowing. If the
floating switch is activated, the suc-
tion procedure is interrupted approx.
3 to 5 seconds later. This measure
prevents the water from penetrating
the suction turbine.
Note: When work is finished the
soiled water tank on principle must be
drained and rinsed.
Rinse the floating switch as well.
The seal at the outlet hose should be
cleaned at regular intervals. If required
grease the O ring slightly. Rinsing of
the suction hose to the squeegee is
possible from the top via socket (III/6).
Refer to page 48 for detailed informa-
tion on draining of the soiled water
tank.
55
Caution! For disposal of soiled water
and lye, the legal provisions have to
be complied with.
Removal of the filter
Remove cap of the intake socket
(III/7)
Remove ring filter and clean
(replace defective filter)
Note: Upstream the fresh water out-
let, the tank bottom is equipped with
a sieve which can be unscrewed.
Check this sieve at regular intervals
and clean if required.
Soiled and
fresh water tanks
The Hakomatic B 910 is equipped
with a soiled water tank (III/5) and a
fresh water (lye) tank (III/3).
Either tank is equipped with flexible
pane. Soiled water is fed via the suc-
tion hose through the inlet socket
(III/6) into the soiled water tank.
A floating switch in the soiled water
tank precludes overflowing. If the
floating switch is activated, the suc-
tion procedure is interrupted approx.
3 to 5 seconds later. This measure
prevents the water from penetrating
the suction turbine.
Note: When work is finished the
soiled water tank on principle must be
drained and rinsed.
Rinse the floating switch as well.
The seal at the outlet hose should be
cleaned at regular intervals. If required
grease the O ring slightly. Rinsing of
the suction hose to the squeegee is
possible from the top via socket (III/6).
Refer to page 48 for detailed informa-
tion on draining of the soiled water
tank.
55
Caution! For disposal of soiled water
and lye, the legal provisions have to
be complied with.
Removal of the filter
Remove cap of the intake socket
(III/7)
Remove ring filter and clean
(replace defective filter)
Note: Upstream the fresh water out-
let, the tank bottom is equipped with
a sieve which can be unscrewed.
Check this sieve at regular intervals
and clean if required.
Soiled and
fresh water tanks
The Hakomatic B 910 is equipped
with a soiled water tank (III/5) and a
fresh water (lye) tank (III/3).
Either tank is equipped with flexible
pane. Soiled water is fed via the suc-
tion hose through the inlet socket
(III/6) into the soiled water tank.
A floating switch in the soiled water
tank precludes overflowing. If the
floating switch is activated, the suc-
tion procedure is interrupted approx.
3 to 5 seconds later. This measure
prevents the water from penetrating
the suction turbine.
Note: When work is finished the
soiled water tank on principle must be
drained and rinsed.
Rinse the floating switch as well.
The seal at the outlet hose should be
cleaned at regular intervals. If required
grease the O ring slightly. Rinsing of
the suction hose to the squeegee is
possible from the top via socket (III/6).
Refer to page 48 for detailed informa-
tion on draining of the soiled water
tank.
55
Caution! For disposal of soiled water
and lye, the legal provisions have to
be complied with.
Removal of the filter
Remove cap of the intake socket
(III/7)
Remove ring filter and clean
(replace defective filter)
Note: Upstream the fresh water out-
let, the tank bottom is equipped with
a sieve which can be unscrewed.
Check this sieve at regular intervals
and clean if required.
Soiled and
fresh water tanks
The Hakomatic B 910 is equipped
with a soiled water tank (III/5) and a
fresh water (lye) tank (III/3).
Either tank is equipped with flexible
pane. Soiled water is fed via the suc-
tion hose through the inlet socket
(III/6) into the soiled water tank.
A floating switch in the soiled water
tank precludes overflowing. If the
floating switch is activated, the suc-
tion procedure is interrupted approx.
3 to 5 seconds later. This measure
prevents the water from penetrating
the suction turbine.
Note: When work is finished the
soiled water tank on principle must be
drained and rinsed.
Rinse the floating switch as well.
The seal at the outlet hose should be
cleaned at regular intervals. If required
grease the O ring slightly. Rinsing of
the suction hose to the squeegee is
possible from the top via socket (III/6).
Refer to page 48 for detailed informa-
tion on draining of the soiled water
tank.
55
Caution! For disposal of soiled water
and lye, the legal provisions have to
be complied with.
Removal of the filter
Remove cap of the intake socket
(III/7)
Remove ring filter and clean
(replace defective filter)
Note: Upstream the fresh water out-
let, the tank bottom is equipped with
a sieve which can be unscrewed.
Check this sieve at regular intervals
and clean if required.
Scrubmaster B140 R is equipped
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hako Scrubmaster B140R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hako Scrubmaster B140R in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info