683788
15
Zoom out
Zoom in
Previous page
1/42
Next page
15
Operation
Display (Fig. 4/1)
This panel allows centralized monito-
ring of functions and detection of all
available operating modes.
The key switch turns the electrical sy-
stem on and off.
Pull the switching key to avoid
unauthorized use of the machi-
ne.
Battery charge indication (Fig. 4/3)
Battery charge indication appears on
the panel during the charging procedu-
re and shows the current charge condi-
tion of batteries during the procedure.
The following symbols appear:
Battery symbol A < charge of 20 %
Battery symbol B = charge of 80 %
Battery symbol C = charge of 100 %
Battery symbol D (flashes) = error
LDS indicator (Fig. 4/4)
Upon switching on, the LDS indication
is output on the panel to show the cur-
rent battery charge condition during
operation. Additional Information see
chapter maintenance.
Symbol brush drive (Fig. 4/5)
This symbol appears when brush drive
is switched on.
Symbol suction turbine drive (Fig. 4/
6)
This symbol appears when suction tur-
bine drive is switched on.
Hourmeter (Fig. 4/7)
Upon switching on, the hourmeter
briefly displays the software version
and the last error code. Then the cur-
rent operating hour level is shown.
Service indicator (Fig. 4/8)
The service indicator lights after occur-
rence of a system error and cleaning or
riding procedure is interrupted. In addi-
tion to the service indicator, a 4-digit
code is displayed on the hourmeter.
A B C D
1.1.1.1
15
Operation
Display (Fig. 4/1)
This panel allows centralized monito-
ring of functions and detection of all
available operating modes.
The key switch turns the electrical sy-
stem on and off.
Pull the switching key to avoid
unauthorized use of the machi-
ne.
Battery charge indication (Fig. 4/3)
Battery charge indication appears on
the panel during the charging procedu-
re and shows the current charge condi-
tion of batteries during the procedure.
The following symbols appear:
Battery symbol A < charge of 20 %
Battery symbol B = charge of 80 %
Battery symbol C = charge of 100 %
Battery symbol D (flashes) = error
LDS indicator (Fig. 4/4)
Upon switching on, the LDS indication
is output on the panel to show the cur-
rent battery charge condition during
operation. Additional Information see
chapter maintenance.
Symbol brush drive (Fig. 4/5)
This symbol appears when brush drive
is switched on.
Symbol suction turbine drive (Fig. 4/
6)
This symbol appears when suction tur-
bine drive is switched on.
Hourmeter (Fig. 4/7)
Upon switching on, the hourmeter
briefly displays the software version
and the last error code. Then the cur-
rent operating hour level is shown.
Service indicator (Fig. 4/8)
The service indicator lights after occur-
rence of a system error and cleaning or
riding procedure is interrupted. In addi-
tion to the service indicator, a 4-digit
code is displayed on the hourmeter.
A B C D
1.1.1.1
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hako Scrubmaster B 70 CL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hako Scrubmaster B 70 CL in the language / languages: English as an attachment in your email.

The manual is 3,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hako Scrubmaster B 70 CL

Hako Scrubmaster B 70 CL User Manual - German - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info