683788
7
Zoom out
Zoom in
Previous page
1/42
Next page
7
Safety information
the squeegee and the brush head.
Adapt driving habit to local conditi-
ons.
The machine may be used only for
operation on plane areas with a ma-
ximum inclination of up to 2 %.
1.4 Maintenance instructions
The daily and weekly maintenance
and repair task must be performed
by a qualified operator. For any
maintenance and repair work
beyond please contact your local
Hako service centre.
Observe the maintenance activities
and intervals set out in the instruc-
tion manual.
Maintenance and repair work may
be carried out only by means of ap-
propriate tools.
Have the machine checked for safe
condition in the sense of the Acci-
dent Prevention Regulation by an
expert at regular intervals (recom-
mendation: at least once yearly) as
well as after modifications or repair.
Spare parts have to equal the techni-
cal requirements as specified by the
manufacturer! Genuine spare parts
guarantee compliance with these re-
quirements.
Stop engine before proceeding to in-
spection and maintenance work.
To prevent the machine from being
used by unauthorized persons, the
control key must be removed.
When performing work at the electri-
cal system, be sure to remove the
battery plug.
Make sure to protect the soiled water
tank against accidental closing or til-
ting down before working in the area
of a lifted tank lid.
Do not clean the electrical parts by
means of high-pressure cleaning
equipment.
The use of aggressive detergents is
not admitted.
Let the machine dry after cleaning
e.g. for weekend.
The machine may be taken into ope-
ration after all protective devices
have been fitted and positioned.
1.5 Specific Hazards
Electric system
Only use genuine fuses with prescri-
bed connecting load.
In case of malfunction of the electric
system, immediately shutdown ma-
chine and remedy.
Qualified personnel only is authori-
sed to proceed to works at the elec-
trical equipment and only according
to electro-technical rules.
Inspect/check the electrical equip-
ment of the machine at regular inter-
valls. Immediately remedy defects
such e.g. loose connections or scor-
ched cables.
Battery
Respect the operating instructions of
the battery manufacturer.
Handling and changes of the batte-
ries may take place only by mainte-
nance staff.
Never place metal objects or tools on
batteries - short-circuit hazard!
Due to alteration of the centre of gra-
vity, only use batteries as released
and at the prescribed position only.
Provide for sufficient ventilation of
areas where batteries are charged. –
Explosion hazard!
Refer to safety provisions in supple-
ment 88-60-255
6 - Information on
drive batteries.
7
Safety information
the squeegee and the brush head.
Adapt driving habit to local conditi-
ons.
The machine may be used only for
operation on plane areas with a ma-
ximum inclination of up to 2 %.
1.4 Maintenance instructions
The daily and weekly maintenance
and repair task must be performed
by a qualified operator. For any
maintenance and repair work
beyond please contact your local
Hako service centre.
Observe the maintenance activities
and intervals set out in the instruc-
tion manual.
Maintenance and repair work may
be carried out only by means of ap-
propriate tools.
Have the machine checked for safe
condition in the sense of the Acci-
dent Prevention Regulation by an
expert at regular intervals (recom-
mendation: at least once yearly) as
well as after modifications or repair.
Spare parts have to equal the techni-
cal requirements as specified by the
manufacturer! Genuine spare parts
guarantee compliance with these re-
quirements.
Stop engine before proceeding to in-
spection and maintenance work.
To prevent the machine from being
used by unauthorized persons, the
control key must be removed.
When performing work at the electri-
cal system, be sure to remove the
battery plug.
Make sure to protect the soiled water
tank against accidental closing or til-
ting down before working in the area
of a lifted tank lid.
Do not clean the electrical parts by
means of high-pressure cleaning
equipment.
The use of aggressive detergents is
not admitted.
Let the machine dry after cleaning
e.g. for weekend.
The machine may be taken into ope-
ration after all protective devices
have been fitted and positioned.
1.5 Specific Hazards
Electric system
Only use genuine fuses with prescri-
bed connecting load.
In case of malfunction of the electric
system, immediately shutdown ma-
chine and remedy.
Qualified personnel only is authori-
sed to proceed to works at the elec-
trical equipment and only according
to electro-technical rules.
Inspect/check the electrical equip-
ment of the machine at regular inter-
valls. Immediately remedy defects
such e.g. loose connections or scor-
ched cables.
Battery
Respect the operating instructions of
the battery manufacturer.
Handling and changes of the batte-
ries may take place only by mainte-
nance staff.
Never place metal objects or tools on
batteries - short-circuit hazard!
Due to alteration of the centre of gra-
vity, only use batteries as released
and at the prescribed position only.
Provide for sufficient ventilation of
areas where batteries are charged. –
Explosion hazard!
Refer to safety provisions in supple-
ment 88-60-255
6 - Information on
drive batteries.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hako Scrubmaster B 70 CL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hako Scrubmaster B 70 CL in the language / languages: English as an attachment in your email.

The manual is 3,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hako Scrubmaster B 70 CL

Hako Scrubmaster B 70 CL User Manual - German - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info