9.1 Maintenance work
Compliance with our recommenda-
tions concerning maintenance work
will give you the certitude always
having a machine at your disposal,
which is ready to work and in good
operating condition. It is better to take
precautions than to repair damages -
and less expensive!
Please contact your local Hako distri-
butor; the people there will be glad to
perform that work for you. There well
trained personnel and genuine Hako
spare parts are at your disposal. In
case of any inquiries or orders for
spare parts, please always quote the
machine's serial number mentioned on
the nameplate. The nameplate is fixed
in the rear side of the machine.
When cleaning or servicing the machi-
ne, and when replacing any parts, shut
off the machine and on principle dis-
connect the power plug from the
power supply. For reasons of safety
during cleaning
and/or maintenance work in or on the
tank, the tank lid - when lifted - must
be secured so as to prevent accidental
closing or tilting down. The machine
may be taken into operation only if all
guarding devices are fitted and in pro-
tective position. As far as possible,
cleaning should not be done by hand,
but using appropriate tools or equip-
ment. Maintenance and repair work
may be carried out only by means of
suitable tools and by the people trai-
ned in the factory. For reasons of safe-
ty, only genuine Hako spare parts may
be used.
Note: Before performing the mainte-
nance, inspection and/or repair work
described below, check all operating
elements and components of the
machine for proper operation, and
identify any possible malfunctions.
After repair work has been done, the
machine may be taken into operation
against only after a safety test.
22
9. Maintenance and service
9.1 Maintenance work
Compliance with our recommenda-
tions concerning maintenance work
will give you the certitude always
having a machine at your disposal,
which is ready to work and in good
operating condition. It is better to take
precautions than to repair damages -
and less expensive!
Please contact your local Hako distri-
butor; the people there will be glad to
perform that work for you. There well
trained personnel and genuine Hako
spare parts are at your disposal. In
case of any inquiries or orders for
spare parts, please always quote the
machine's serial number mentioned on
the nameplate. The nameplate is fixed
in the rear side of the machine.
When cleaning or servicing the machi-
ne, and when replacing any parts, shut
off the machine and on principle dis-
connect the power plug from the
power supply. For reasons of safety
during cleaning
and/or maintenance work in or on the
tank, the tank lid - when lifted - must
be secured so as to prevent accidental
closing or tilting down. The machine
may be taken into operation only if all
guarding devices are fitted and in pro-
tective position. As far as possible,
cleaning should not be done by hand,
but using appropriate tools or equip-
ment. Maintenance and repair work
may be carried out only by means of
suitable tools and by the people trai-
ned in the factory. For reasons of safe-
ty, only genuine Hako spare parts may
be used.
Note: Before performing the mainte-
nance, inspection and/or repair work
described below, check all operating
elements and components of the
machine for proper operation, and
identify any possible malfunctions.
After repair work has been done, the
machine may be taken into operation
against only after a safety test.
22
9. Maintenance and service
