627526
12
Zoom out
Zoom in
Previous page
1/154
Next page
12
Safety Information
distance = 1 km.
Before leaving the driver’s seat, ap-
ply the parking brake.
The machine is only suitable for de-
ployment on level surfaces with a
maximum slope of 12% (Total weight
for tractor/trailer combination).
1.4 Maintenance information
Operating personnel must complete
the necessary daily and weekly
maintenance work. All other mainte-
nance work must be completed at
your nearest Hako service center.
The maintenance work and mainte-
nance intervals prescribed in the op-
erating manual must be adhered to.
Before cleaning and maintenance
work, switch the engine off and allow
to cool down. Danger of burns from
hot surfaces. The parking brake is to
be applied, the ignition key is to be
removed and the vehicle is to be se-
cured against accidental starting up
and unintended movement.
Suitable tools must be used for
cleaning and maintenance work.
As required by the accident preven-
tion rules, the vehicle has to be in-
spected by a recognized technical
expert at reasonable intervals (we
recommend at least annually), and
also following any modification or re-
pair, in order to check that it is oper-
ationally safe.
Replacement parts have to comply
with the minimum technical require-
ments stipulated by the manufactur-
er. This is ensured by the use of
original spare parts.
During maintenance work when the
dirt hopper is raised, the safety sup-
port has to be moved to the upper
position and inserted.
Prior to cleaning or servicing the ma-
chine or replacing parts, the equip-
ment has to be switched off.
Do not use a steam cleaner or high
pressure washer. Do not direct the
water jet directly against electrical or
electronic components.
For maintenance work, access can
be gained via the doors in the side
cover panel.
If the Hako-Citymaster 1250 is
jacked up with a jack, an additional
secure support is required.
Nobody may be on the Hako-City-
master 1250 when it is jacked up or
raised.
Do not remove or replace tires or re-
pair while still mounted on the rim.
Always go to a proper workshop for
work on tires and rims because they
have specially trained personnel and
special safety tools.
Do not carry out any welding, drilling,
sawing or grinding work on frame
parts. Damaged parts may only be
replaced by specialist workshops ap-
proved by Hako.
Only use original fuses. Using fuses
with a too high rating could damage
the electrical installation and lead to
fires.
Regularly subject the brake system
to a thorough inspection. Adjust-
ments and repairs to the brake sys-
tem may only be completed by
specialist workshops approved by
Hako or by recognized brake service
workshops.
Before repairs to the hydraulic sys-
tem lower any attachments and de-
pressurize the hydraulic system.
Regularly subject the hydraulic sys-
tem to a thorough inspection! Adjust-
ment and repair work on the
hydraulic system may only be per-
formed in specialist Hako work-
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hako Citymaster 1250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hako Citymaster 1250 in the language / languages: English as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hako Citymaster 1250

Hako Citymaster 1250 User Manual - French - 154 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info