771619

Haier Jade serie Manual

8
Zoom out
Zoom in
Previous page
1/73
Next page
and outlet grills of the air conditioner are opened, and
the unit goes on working under the condition before the
grille will close automatically.
Notice:
Cannot pull direct the outlet grille by hand. Otherwise, the
grille will run incorrectly. If the grille is not run correctly,
stop for a minute and then start, adjusting by remote
controller.
Remote controller can memorize each operation status.
when starting it next time, just press ON/OFF button and
unit will run in previous status.
The setting of
function
The cancel of
function
Operation
HEALTH AIRFLOW OperationSELF-CLEAN Operation
appears on the display. Avoid
the body.
again, appears on the display.
direct to the body.
Note:
2. In heating, it is better to select the mode.
3. In cooling, it is better to select the mode.
4. In cooling and dry, using the air conditioner for a
long time under the high air humidity, a phenomenon
falling drips of water occurs at the outlet grille.
5. Select the appropriate fan direction according to the
actual conditions.
TIMER
5
SMART
HUMIDITY
AIR
STATUS
◆Functional description:
the purpose of this function is to clean the indoor and outdoor
heat exchanger.
◆Entry and exit：
1.Press SELF CLEAN button to enter this function, then
it will display "CL" on the panel of the indoor unit and also
on the remote controller.
2.The air conditioner first conducts self-cleaning for the indoor heat
exchanger，and then conducts self-cleaning for the outdoor heat
3.This function will exit automatically with the " Pi " sound
twice,then the unit return to original state.
4.Under operation process of SELF CLEAN, press the button
repeatedly is invalid and cannot exit, please press the
“power” button or swift to other mode to exit.
exchanger after a period of time, the whole cycle lasts for 20-30
minutes.
2.After entering the self-cleaning function, the indoor air
volume will decrease or no wind will blow out, and the fan
may stop, but the compressor won’t stop;
3. During the operation, the indoor unit conducts self-cleaning,
and there may be cold air blowing out; the indoor unit conducts
self-cleaning, and there may be warm air blowing out;
4. During the self-cleaning, the heat exchanger may have
frost formed accompanied by poop sound; the connecting
pipe and valves of the outdoor unit may also have frost
formed.
5. To enhance the cleaning effects, the air deflectors may be
in different positions and the remote controller cannot be
used.
6. Depending on the different working environment of the
indoor and outdoor unit, cleaning effects of the heat
exchanger may vary.
8.If the outside ambient temperature below zero, error
code “F25 “may be occurred during self-cleaning operation ,
which is normal protection, please turn off the power
and to restart after 10 seconds .
7. The “CL” display time may last differently on the remote
controller and panel.
◆ Note:
1.This function is effective in the cooling and dehumidifying
mode and is invalid in the sleep/timer mode.
9.The best condition to run this mode: the temperature is
20℃~27 ℃ and the humidity is 35 ％~60 ％ in the door,
the temperature is 25℃~38 ℃（ cooling season) and
＜10℃(heating season) out the door.
10.It is hard to frost if the air is too dry(humidity＜20%). and
if the humidity is too high(humidity ＞70%),the condensate
water may increase, which may move away some frost.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haier Jade serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haier Jade serie in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 55.64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haier Jade serie

Haier Jade serie User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info