Pump filter
Please clean the filter once a month and check the pump
filter for instanvce if the appliance
▶ doesn´t drain the water.
▶ doesn´t spin.
▶ cause unusual noise while running.
Warning!
Scalding Risk! Water in the pump filter can be very hot! Before any
action please ensure water has cooled down.
1. Turn off and unplug the machine.
2. Open service flap. You can either use a coin or a
screwdriver.
3. Provide a flat container to catch leach water.
There could be bigger amounts!
4. Pull the drainhose out and hold its end above the
container.
5. Take the sealing plug out of the drainhose.
6. After complete drainage, unscrew and remove counter
clockwise the pump filter.
7. Remove contaminants and dirt.
8. Clean carefully pump filter, e.g. using running water.
9. Refix it thoroughly.
10. Close drainhose and push it back into the machine.
11. Close service flap
Caution!
s Pump filter sealing has to be clean and unhurt.
If the lid is not full tightened, water can escape.
s The filter must be in place, or it may lead to leakage.
Cleaning the detergent drawer
Take always care there are no detergent residues.
Clean the drawer regularly. Pull out the drawer until it
stops (1) and press the release button (2) to remove the
drawer. Then flush the drawer with water until it is clean
and insert the drawer back in the appliance.
Cleaning the machine
Unplug the machine during cleaning and maintenance. Use
a soft cloth with soap liquid to clean the machine case and
rubber components. Do not use organic chemicals or
corrosive solvents.
General information and tips
After each installation or longer downtime run at first
programme „Self Clean“ with no load and added deter-
gent in washing agent comparment (2) to remove possible
corruptive residues.
1400
400
600
800
1000
1200
90
20
30
60
40
70
123
Rinse
Anti crease
Speed up
Intense
Soak
Temp.
M emo
Function Selection Spin Delay
M
M
M
R
Cotton Daily Wash
Ultra White
Express 15'
Baby Care
Delicate
Hand Wash
Spin/Drain
Self Clean
Synthetic
Mix
Wool
Under-
wear
Sport
Jeans
Hygienic
°C
60
°C
40
Function
Selection
Delay
Water inlet valve and inlet valve filter
To prevent blockage of water supply by solid substances like
lime clean regularly the inlet valve filter.
Long Periods of disuse
If the appliance is left idle for a longer period, pull out
the electrical plug (1) and turn off water supply (2).
Open the door to prevent formation of moisture and
odours. Let door open while not used.
Before next usage check carefully power cord, water inlet
and drain hose. Make sure everything is properly installed
and without leackage.
Run at first progrmme „Self Clean“ with no load
and added detergent in compartment 2 to remove
possibly corruptive residues.
2
1
2
