817728

Haier HWO45NM6OXB2 Manual

10
Zoom out
Zoom in
Previous page
1/83
Next page
EN 18
EN 19
ELECTRICAL HOOK-UP
Before connecting to the electricity, make
sure that:
• the characteristics of the electrical system
satisfy what is shown on the serial number
plate applied to the front of the oven;
• the system has an effective earth con-
nection compliant with current stand-
ards and laws.
The earth connection is required by law. The
cable must not, at any point, reach a temper-
ature greater than 50 °C above the ambient
temperature.
This oven must be connected to the electric-
ity through a power supply cable and plug that
is compatible with the outlet of the electrical
system that powers this oven.
If a xed appliance does not have a power cord
and plug, or another device that ensures dis-
connection from the mains, with an opening
distance of the contacts that allows complete
disconnection under the conditions of exces-
sive voltage category III, such disconnection
devices must be provided in the power supply
mains conforming to the installation rules.
The omnipolar socket or switch must be easy
to reach when the appliance is installed.
NOTE: The manufacturer declines all liability if
the usual accident prevention standards and
the above instructions are not followed.
TYPE AND MINIMUM DIAMETER
OF THE CABLES
SASO
H05RR-F 3x1,5 mm² H05RR-F 3x2,5 mm²
H05VV-F 3x1,5 mm² H05VV-F 3x2,5 mm²
H05RN-F 3x1,5 mm² H05RN-F 3x2,5 mm²
H05V2V2-F 3x1,5 mm² H05V2V2-F 3x2,5 mm²
EN 18
EN 19
ELECTRICAL HOOK-UP
Before connecting to the electricity, make
sure that:
• the characteristics of the electrical system
satisfy what is shown on the serial number
plate applied to the front of the oven;
• the system has an effective earth con-
nection compliant with current stand-
ards and laws.
The earth connection is required by law. The
cable must not, at any point, reach a temper-
ature greater than 50 °C above the ambient
temperature.
This oven must be connected to the electric-
ity through a power supply cable and plug that
is compatible with the outlet of the electrical
system that powers this oven.
If a xed appliance does not have a power cord
and plug, or another device that ensures dis-
connection from the mains, with an opening
distance of the contacts that allows complete
disconnection under the conditions of exces-
sive voltage category III, such disconnection
devices must be provided in the power supply
mains conforming to the installation rules.
The omnipolar socket or switch must be easy
to reach when the appliance is installed.
NOTE: The manufacturer declines all liability if
the usual accident prevention standards and
the above instructions are not followed.
TYPE AND MINIMUM DIAMETER
OF THE CABLES
SASO
H05RR-F 3x1,5 mm² H05RR-F 3x2,5 mm²
H05VV-F 3x1,5 mm² H05VV-F 3x2,5 mm²
H05RN-F 3x1,5 mm² H05RN-F 3x2,5 mm²
H05V2V2-F 3x1,5 mm² H05V2V2-F 3x2,5 mm²
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haier HWO45NM6OXB2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haier HWO45NM6OXB2 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 4.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info