659592
9
Zoom out
Zoom in
Previous page
1/20
Next page
09
Before use
D ¬Extra Rinse _Press this button, the washing machine will perform additional rinses. Press the button once to
select one additional rinse. The display will show"P-1". Press the button repeatedly and the screen
will display "P-2''or "P-3'', indicating two or three additional selected rinses. The "extra rinse light"
is activated and flashes during the performance. "P-1/2/3" is displayed alternating with the
remaining time. The light turns off and the display disappears when the extra rinse ends.
Note: Select this function when programe 1-9 is selected.
E ¬
LED Display _Information as remaining wash time and error messages will be shown here.
Note: After a wash program is started the display will go on and the remaining
wash time decreases. As the water pressure and temperature may differ, the
remaining time may be adjusted accordingly. When the laundry is not balanced
during spinning, the time may be automatically prolonged.
F ¬Intense button _If the laundry is heavily soiled, press this button before starting the program. When the button is
pressed, the washing time increases.
G
¬
Rinse hold
_Touch this button lightly,the indicator will go on.When the washing machine is at the last rinsing
operation,it will not drain but to start a soaking cycle.If you want to spin the laundry,press this
button or the “start/pause”button again,the indicator will go off and operation will resume.
Note:Select this function when “Pre-wash,Cotton,Synthetic,Mixed,Sport”Programmes are selected.
H ¬Wash Temp _ Touch this button lightly, the washing temperature will be displayed on the display screen. Select a
temperature according to the type of laundry.
I ¬Start/Pause Button _ When the washing machine is connected to the power socket and a program is selected, lightly
touch this button to start operation. During a wash cycle, touch it lightly ,operation will stop and
the digits on the screen start blinking. Touch it again to resume operation. To cancel a wash program
during a wash cycle, touch this button, when the digits on the screen start blinking, press the Power
switch, the program will be cancelled.
J ¬Program Dial _By turning the knob clockwise/counterclockwise, the required program can be selected. There are
10 programs available. After a program is selected, the corresponding light will go on.
K
¬Power Button _ Press this button to switch on the washing machine. Press it again to switch it off.Press this button
gently for 2 seconds to switch off the machine as buttons are soft touch sensitive.
¬To cancel a program
Press the "Start/Pause" button, then switch off the power and the program is automatically cancelled. Turn the Turn on the power and use
the program selector again to choose another program.
¬To cancel audible alarm
Alarm sound can be cancelled if it is required (not recommended)
Switch on the washing machine and turn the program knob to spin cycle, then press the "Delay" and "Extra rinse" button, hold on for 3
seconds.
The message "BEEP OFF” will be displayed on the screen, indicating that the alarm sound has been cancelled.
¬To reinstate audible alarm
Switch on the washing machine and turn the program knob to spin cycle, then press the "Delay" and "Extra rinse" button, hold on for 3
seconds.
The "BEEP ON" message will be displayed on the screen, indicating that the alarm sound has been reinstated.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haier HWM70-1201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haier HWM70-1201 in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info