817689
11
Zoom out
Zoom in
Previous page
1/34
Next page
EN 3-Control panel
11
3.4 Detergent drawer
Open dispenser drawer, the following components can
be seen (Fig. 3-5):
1: Compartment for powder or liquid detergent
2: Detergent flap slector, lift it up for powder detergent,
keep it down for liquid detergent.
3: Compartment for softener.
4: Lock tab, press it down to pull out dispenser drawer
The recommendation on the type of the detergents
is suitable for the various washing temperatures.
Please refer to the manual of detergent(see P11).
3.7 Child lock
Choosing a programme and then start, press button
“Delay” and ”Dry level” ( Fig .3-13) for 3 seconds simultane-
ously to block all panel elements against activation, panel
display .For unlocking please press again the two but-
tons.The child lock indicator lights up when the child lock
works. Feature is optional when the machine is running.
The display shows (Fig. 3-14) if a button will be
pressed, when the child lock is activated. The change is not
running. .
3-11
3-12
3-9
3-10
3-13
3-12
Dry level
3.5.3 Function button“Temp.“
Press this button (Fig. 3-9) to change the washing tem-
perature of the programme. If no value is illuminated
(the display”-- °C“) the water will not be heated.
3.5.4 Function button“Speed“
Press this button (Fig. 3-10) to change or deselect the
spin of the programme. If no value is illuminated the dis-
play“ “ the laundry will not spin.
3.5.5 Function button“Extra Rinse“
Press this button (Fig. 3-11) to rinse the laundry more
intense with fresh water. This is recommended for peo-
ple with sensitive skin. By Pressing the button several
times zero to three additional cycles can be selected.
They appear in the display with P--0/P--1/P--2/P--3.
Diff erent programme optiones are diff erent.
3.6 “Start/Pause“ button
Press this button (Fig. 3-12) gently to start or interrupt
the current programme. During programme setting and
during programme run the LED above the button is shi-
ning, or if interrupted blinking.
3-14
Note: Procedure to check the number of cycles that the machine has run
Procedure: under standby mode, select “Cotton” programme rst, then press “Temp.”
and “Speed” at the same time, it will display the number of running cycles for 2 seconds,
and then back to standby interface. The cumulativer running cycles will add 1 after the
programme ends. The running cycles will be displayed in hexadecimal if it is over 9999.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haier HWD100-B14939 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haier HWD100-B14939 in the language / languages: English as an attachment in your email.

The manual is 2.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haier HWD100-B14939

Haier HWD100-B14939 User Manual - German - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info