800561
17
Zoom out
Zoom in
Previous page
1/204
Next page
1. At programme cycle end END is displayed.
2.
3. Remove laundry as soon as possible to go easy on it and to prevent more wrinkling.
4.
5. Unplug the power cord.
6. Open the door to prevent formation of moisture and odours. Let it open while not used.
6.13 Activate or deactivate the buzzer
To interrupt a running programme press gently “Start/Pause“. The LED above the button
is ashing. Press it again to resume operation.
To cancel a running programme and all its individual settings:
1. Touch”Start/Pause” button to interrupt the running programme.
2.
3.
4. After closing the programm to restart the appliance, select a new programme and
6.12 After washing
Note: Door lock
For safety reasons the door is locked partially during the washing cycle. It is only pos-
sible to open the door at the end of the programme or after the programme was can-
celled correctly (see description above).
In case of high water level, high water temperature and during spinning it is not pos-
sible to open the door; Loc l- is displayed.
Note: Standby-mode / energy-saving mode
The switched on appliance will go into standby-mode if it will not be activated within 2
6.10 Start wash programme
Touch “Start/Pause“ button (Fig. 6-8) to start. The LED of the”Start/
Pause“ button stops ashing and lights up continuously.
Appliance operates according to present settings.
Changes are only possible by cancelling the programme.
6.11 Interrupt / cancel wash programme
6-8
PowerTouch
EN 6-Daily use
17
,ecnailppa eht no nrut ot nottub "rewoP " eht hcuoT
start it.
minutes before srarting the programme or at the end of programme.The display swits-
select “no Speed” (speed lights
are off) and run programme Spin to drain the water.
ches off. This saves energy, To interrupt the standby mode touch “Power” button
The acoustic signal can be selected if necessary:
1. Switch on the appliance.
2. Select the programme.
3. Touch the “Delay “button and “Temp.” button at the same time for about 3 sec-
onds. “bEEP ON ” will be displayed and the buzzer will be activated.
For deactivating the buzzer touch these two buttons at the same time again. “bEEP OFF”
will be displayed.
XI M
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haier HW100-B14979 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haier HW100-B14979 in the language / languages: French, Portuguese, Spanish as an attachment in your email.

The manual is 20.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haier HW100-B14979

Haier HW100-B14979 User Manual - English - 100 pages

Haier HW100-B14979 User Manual - German - 32 pages

Haier HW100-B14979 User Manual - Italian - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info