Manual Haier HR-245 (page 5 of 30) (English, German, Dutch, French)

476759

Zoom out

Zoom in

1/30

Ventilation

（（

（Figure B

））

）

*Level the kitchen cabinet unit with a spirit level and a try square. Level the unit by placing

packing material underneath if required.

*A minimum gap of 38mm must be maintained at

the back of the appliance for ventilation.

*Air inlet A must be at least 200 cm square and

air must flow through the panel in the cabinet

plinth.

*Check that the position of the power socket (1)

is correct. AC voltage in the location at which

the appliance is to be used must comply with

that as shown on the data plate located on the

left inside wall of the appliance next to the

vegetable bins. The power supply must be

suitably earthed.

Preparation

9. Remove and replace component (10), at the corresponding position on the left, with the

special tool provided.

10. Fix component (7) in the corresponding opposite position.

Preparation

（Figure A）

⑴

（Figure B）

Installation

（（

（Figure C

））

）

1.Check that the kitchen unit door is in the correct operating position.

2. Run the mains cable through the unit such that it can be connected to the power supply

after installing the appliance. Remove the cover (6) only if space is restricted.

3.Push the appliance into the kitchen unit leaving a gap of 4mm at the handle side of the

appliance. Align the top and bottom front edges of the support brackets (2) such that they

are flush with the front edge of the kitchen unit. See detail X

4.Cut sealing strip (1) to the height of the kitchen unit and attach to the handle side of the

unit to close the gap between the appliance and the side panel of the kitchen unit (press

the strip (a) into the gap. Pull away the protective strip on the plastic profile before insertion.

5.Push the appliance against the side panel of the kitchen unit and secure it at the top and

bottom (3).

6.Install the door connecting element (4) in accordance with the handle height and the

number of doors. Open the door fully and insert the connecting rod (5) and screw it to the

kitchen unit door maintaining distance (d) to the edge of the door (d=the thickness of the

panel). Adjust the connecting element so that the handle side of the kitchen unit door

does not make contact with the unit body when closed. (Approximately 1mm gap for

large appliances), mount the second door connecting element where appropriate.

7.Plug the open hole in the appliance door.

（Figure C）

⑴

⑵

⑶

⑷

⑸

⑹

⑺⑻⑼⑽

⑵

⑶

⑷

⑸

⑹

⑵

4mm

⑴

⑵

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Haier HR-245 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Haier HR-245 Manual

Product: