22835
19
Zoom out
Zoom in
Previous page
1/30
Next page
HAIER Front Load Washer HK1000TXVE/ME
24
water drainage outlet should be from 80 to100cm.
2).Check whether the program is properly selected.
3).Connect the power cable to the drainage pump to check whether the operation is normal.
If not, make necessary replacement.
IV .Unusual noise
Possible causes
1.The packing screws should be disassembled.
2.The washer is placed too near a wall.
3.The washer is loaded over the standard capacity (6Kg).
4.There is foreign object other than fabrics in the washer.
5.The washer does not stand level.
6.Bolts or screws are loose.
7.The belt is loose.
8.Something is wrong with the triangle assembly.
Troubleshooting
1.Disassemble the packing screws.
2.Move the washer away from the wall.
3.Do not load the appliance more than the standard capacity.
4.Remove the foreign object.
5.Adjust the washer until it is level.
6.Tighten the bolts and screws.
1) .Fastening bolts of vibration damper
2) .Fastening bolts of balances
3) .Screws of water heating pipe
7.Increase the tension of belt.
8.Replace the triangle assembly.
V.The drum doesn't rotate; the spin speed is too high or too low.
Possible causes
1.The belt tension is too low or the fastening bolts are loose.
2.The plug wire of motor is loose or the motor is broken.
3.The capacitor is broken.
4.The electronic module is broken or is not properly plugged.
Troubleshooting
1.Adjust the tension of belt and tighten the screws.
2.Check whether the plug wire of motor is loose or whether the motor works normally. If not,
make necessary replacement.
3.Check whether the capacitor is good with a universal meter. If not, make necessary
replacement.
4.Replace the electronic module with a new one.
VI .The water level is too high.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haier HK1600TXVE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haier HK1600TXVE in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info