22837

Haier HK1400TXVE Manual

18
Zoom out
Zoom in
Previous page
1/30
Next page
HAIER Front Load Washer HK1000TXVE/ME
24
I .The appliance does not work.
Possible causes
1.The socket is not the required one or the connection is loose.
2.The door is not properly closed or the switch of micro delay is in poor contact.
3.The plug wire of motor is in poor contact or the motor is broken.
4.Malfunction of electronic module
Troubleshooting
1.Check the socket and plug to make sure that they are properly connected.
2.Check whether the micro delay switch is in good contact in on-position. If yes, insert the
terminal firmly to provide a good connection.
3.The electronic module controls the rotary speed and direction of the motor. In case of the
failure, check the wiring or replace the electronic module.
II .Filling failur
Possible causes
1.The switch of water supply is not opened or the water pressure is too low.
2.The door is not properly closed or the micro delay switch is in poor contact
3.The water electromagnetic valve is broken.
4.The plug wire of drainage pump is in poor contact.
5.The pressure switch is broken.
Troubleshooting
1.Repeat the following steps.
1).Open the switch of water supply
2).Check whether the filling hose is twisted or blocked.
3).Check whether the water eletromagnetic valve is blocked.
4).Check whether program is properly selected.
5).Check whether the water supply pressure is too low.
2.Check the door catch and the door lock are in good contact. If not, make necessary
adjustment. Check whether the micro delay switch is in good contact in on-position.
3.Check whether the electromagnetic is good in on-position. Fasten it if necessary.
4.Blow on the pressure switch and "click, click" can be heard. Otherwise, replace the
pressure switch with a new one.
III .No drainage
Possible causes
1.Improper installation
2.The drainage pump is broken.
Troubleshooting
1.Repeat the following steps.
1).Check whether the drainage pipe is twisted or blocked. The appropriate height of the
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haier HK1400TXVE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haier HK1400TXVE in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info