817644
25
Zoom out
Zoom in
Previous page
1/36
Next page
25
11.6 Reversing the door swing (Only for 8/9kg models)
Before you start, unplug the dryer from its electricaloutlet.
Handle parts carefully to avoid scratching paint.
Provide a non-scratching work surface for the doors.
Tools you will need: Phillips-head screwdriver.
Once you begin, do not move the cabinet until door-swing reversal is completed.
These instructions are for changing the hinges from the right side to the left side.
If you ever want to switch them back to the right side, follow these same instructions
and reverse all references to the left and right.
1. Remove the door assembly
Open the door. Remove the two screws holding the-
hinge/door assembly to the dryer. Carefully set the
hinge/door assembly aside (Fig. 11-4).
2. Remove, rotate and replacethe inner door
Remove the eight stickers and screws securing the
inner door to the outer door. Remove the inner door,
rotate it 180° and reinstall it into the outer door using
the same eight screws and stickers (Fig. 11-5).
3. Remove, rotate and replace the door lock & strike
plate
Remove the two screws holding the strike plate, and
then remove one screw of the door lock, push down
and take out the lock rotated 180° and install it on the
opposite side. the same eight screws and stickers (Fig.
11-6).
4. Rotate and replace the hinge/door assembly
Remove the two screws holding the strike plate, and
then remove one screw of the door lock, push down
and take out the lock rotated 180° and install it on the
opposite side. the same eight screws and stickers (Fig.
11-7).
11.7 Wash-dryer stack
The arrangement to a space saving wash-dryer stack
is possible (Fig. 11-8). Not every washing machine is
suitable for this purpose. Information, as well as the
corresponding mounting kit are available via your local
dealer.
The mounting instructions supplied with the kit care-
fully inform about the installation steps.
Hinge and Door
Assembly
Hold the Door and
Remove Hinge Screws
from the Dryer
Replace
the Door lock
and then
Reinstall
Strike Plate
and Screws
Strike Plate
and Screws
side.
1.Push
down
2.rotate an
angle then
can take
out
Secure with same
two screws
Remove eight
stickers and
screws
Remove the
Inner door and
rotated 180
as shown
o
Replace the
inner door with
eight screws and
stickers
screws and stickers.
11-4
11-5
11-6
11-7
11-8
EN 11-Installation
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haier HD90-A2959S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haier HD90-A2959S in the language / languages: English as an attachment in your email.

The manual is 7.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haier HD90-A2959S

Haier HD90-A2959S User Manual - German - 36 pages

Haier HD90-A2959S User Manual - Dutch - 36 pages

Haier HD90-A2959S User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info