817643
24
Zoom out
Zoom in
Previous page
1/36
Next page
EN
11-Installation
24
11.1 Preparation
Remove all packaging material. While opening the package, water drops may be
seen. This normal phenomenon results from water tests in the factory.
Remove all packaging material including the polystyrene base.
Notice
Dispose of the packaging in an environmentally friendly manner. For information refer-
ring current disposal routes, consult your retailer or the local authorities.
11.4 Installation under worktop
The dimensions of the recess should at least agree
with the dimensions (Fig. 11-2).
1. Put the appliance adjacent to the slot. Make sure that
all connections are easily accessible and functional.
2. Adjust accurately all feet to get a fi rm level position.
3. Install the appliance prudently into the recess.
4. Pay attention to suffi cient ventilation.
11.5 Electrical connection
Before each connection check if:
power supply, socket and fusing are appropriate
to the rating plate.
the power socket is earthed and no multi-plug
or extension.
the power plug and socket are strictly according.
Only UK: The UK plug meets BS1363A standard
Put the plug into the socket. (Fig. 11-3).
WARNING!
If the supply cord is damaged, it must be replaced by the service agent (see warranty
card) in order to avoid a hazard!
WARNING!
Following transportation and installation, you MUST leave the dryer to stand for two
hours before use.
11.2 Transport and waiting time
Transport the appliance in horizontal position only. To the maintenance-free lubrication
oil is located in the capsule of the compressor. This oil can get through the closed pipe
system during slanting transport. Before connecting the appliance to the power supply
you have to wait 2 hours so that the oil runs back into the capsule.
11.3 Aligning the appliance
The appliance should be placed on a flat and solid sur-
face. Set the feet to the desired level (Fig. 11-1).
11-1
11-2
11-3
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haier HD90-A2959 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haier HD90-A2959 in the language / languages: English as an attachment in your email.

The manual is 7.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haier HD90-A2959

Haier HD90-A2959 User Manual - German - 36 pages

Haier HD90-A2959 User Manual - Dutch - 36 pages

Haier HD90-A2959 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info