656493
21
Zoom out
Zoom in
Previous page
1/313
Next page
20
GB
Cleaning and usage of the icemaker
Cleaning the ice cube tray
1. Turn off the icemaker function via the display panel, hold
down the handle of the icemaker, and use strength to pull
out the icemaker.
2. Remove the icemaker assembly from the refrigerator and
turn over the icemaker, so that the ice cube tray is visible.
3. Pull the oval shaped fastener on the ice tray in the direction
of arrow 1.
Tilt the ice tray upward and pull it out in the direction of
arrow 2.
4. Aftercleaningthetray,putitbackin,thenrmlypushin
the icemaker, close the freezer drawer, and switch on the
icemaker function via the display panel.
Icemaker usage precautions
Caution
For newly installed appliance, you should wait for 24 hours.
This will enable the freezer compartment to cool down, so that
it can make ice.
• The ice machine will make 8 ice cubes each time; but the
specicice-makingquantitywilldependontheindoor
temperature, frequency that the doors are opened, water
pressure, freezer compartment temperature, etc.
• Inordertoensurethattheicetraygetslledupwithice
cubes, the ice tray should be frequently pulled out so that the
ice cubes get evenly distributed.
• It is a normal phenomenon that some of the ice cubes will
clump together during removing (this can be resolved by
reducing the water intake times).
• When the freezer compartment reaches or is below -12 °C,
the icemaker will start making ice (if you are just beginning
to use the icemaker, or it has not been used to make ice in a
longtime,youshoulddiscardtherstseveralicecubes,so
that impurities in the water line get run out.)
• The icemaker can just supply water via the reservoir on top
of the left hand door unit, it cannot be directly connect to
external drinking water source.
• The icemaker must be installed in the refrigerator through an
authorized service agency.
If you occasionally hear unusual sounds in
the refrigerator
You may occasionally hear some "crunching" sounds, but
these are just normal sounds that are emitted during ice
making, so do not worry.
If you do not often use ice cubes
"Old" ice cubes will become cloudy, and will not taste fresh;
therefore, please periodically clean the ice cube tray and
wash it out with warm water. Before replacing the ice cube
tray, be sure to cool it down, otherwise, ice will stick to other
parts of the ice machine and affect the ice making function.
If the icemaker in the freezer compartment
is not used for a long time
If not used for a long time, please remove the automatic
icemaker and any residual ice cubes in the ice storage
compartment, wash the ice cube tray and the ice storage
compartment with warm water, wipe them dry with a clean
towel and put them somewhere else in order to increase
storage space.
The water reservoir should be removed, any residual water
should be drained out and the tank should be cleaned with
warm water.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haier HB25FSSAAA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haier HB25FSSAAA in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 33,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info