656492
10
Zoom out
Zoom in
Previous page
1/30
Next page
Preparation before use
2. Check the components list to ensure all parts and materials are
provided. Consult your dealer if you find parts are missing.
1. Remove all packaging material.
This includes the foam base, corner
posts, adhesive tape, etc.
3. Place the refrigerator in a suitable
location.
(See previous section - “Location”).
4. Toe grille installation.
Open and remove the lower freezer compartment bin.
Install the toe grille with screws from the gift bag as shown.
Please ensure the model and serial number, purchase date and receipt are
copied and taped to the manual for safe keeping.
5. It is recommended to clean the refrigerator
before use.
Before putting food in the refrigerator, please
clean inside and outside with water and diluted
baking soda. Dip a clean cloth in approx 4
litres of water and a spoonful of baking soda.
6. Position the fridge then plug it in!
After the refrigerator has been placed on a flat
surface and cleaned, turn on the power then let
it run a few hours, before loading it with food.
1. Plugging in the power cord.
After turning on the power, the factory pre-sets will be in
effect, the default time is 12:00, the the dispenser control
centre is in unlock mode.
2. Operation of the refrigerator.
Adjusting manually: Once in operation the control functions
can then be set according to your requirements.
(See section - “Setting the control functions” overleaf).
3. Put the food into the refrigerator.
The refrigerator will be cooled completely after a period of a
few hours. Frozen and fresh foods can then be put into the
refrigerator for normal use.
When changing the fridge temperature
the new temperature will only occur after
a period of time. The length of this period
of time depends on the degree of the
temperature change, the ambient
temperature, the frequency of door
openings, and the amount of food stored
in the fridge.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haier HB21FWRSS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haier HB21FWRSS in the language / languages: English as an attachment in your email.

The manual is 9,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info