771618
7
Zoom out
Zoom in
Previous page
1/21
Next page
Operation
Clock set
Note:
Note: The distance between the signal transmission head and
the receiver hole should be within 7m without any obstacle
change-over wireless telephone is installed in the type
in receiving the signals, so the distance to the indoor unit
should be shorter.
Full display or unclear display during operation indicates the
batteries have been used up. Please change batteries.
If the remote controller can’t run normally during operation,
please remove the batteries and reload several minutes later
Hint:
Remove the batteries in case unit won’t be in usage for
a long period.
20. 10 ºC button
special heating set
function: 10 degree
heating maintaining
(valuable for RS)
18. buttonTIMER
23. SWING up/down button
24. SWING left/right button
19. buttonCLOCK
26. HEALTH AIRFLOW button
21. HEALTH button
28. CODE button
A-b yard
29. APPLY button
30. °F/°C button
25. SLEEP button
19
20
21
22
23 24
25
26
27
28
29
30
18
22. SMART button
Used to set SMART
operation. (This function
is unavailable on some
models.)
27. LIGHT button
Control the lightening and
extinguishing of the indoor
LED display board.
Press CLOCK button,
Press “+” or “-” to set
correct time.
Each press will increase or
decrease 1min. If the button is
kept pressed, time will change
quickly.
press APPLY, “AM” and
starts working.
1
2
3
2
1. SMART+SLEEP:When the light sensing function is enabled,
the appliance will be in the mode. If the appliance
detects that indoor light is weak (lower than the setting
value) for several minutes, the light sensing function
works automatically. If theappliance detects no movements
of people for 20 minutes , during which the light is weaker
than the setting value , it will enter the SMART+SLEEP
mode automatically. The appliance will operate as per the
sleep curve.(See the“SLEEP”function in Page 7).
Conditions to exit:
1) The appliance detects that the indoor light is stronger
than the setting value for 20 minutes.
2) The appliance is in the 8h “SMART + SLEEP” mode.
3) The “LIGHT SENSING” function is disabled.
When any of the above conditions is met, the appliance will
exit from the “SMART+SLEEP” mode. Once out of the
“SMART+SLEEP” mode, the appliance will operate under
the operation status initially set on the remote controller.
Note:1) This function is not available in the “AIR SUPPLY”
mode.
2) This function is not available in the “SLEEP”mode.
3) When it is in the "REMOTE SLEEP” mode or the
“TIMER”is on, the appliance will exit from this function.
4) Light sources like indoor lamps and TV’s LED
light,and frequent movement s of pets will affect this
function.
2. Press HEALTH”+“HEALTH AIRFLOW” simultaneously can
set and cancel the “LOCK” function ( )
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haier Flexis Plus 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haier Flexis Plus 2021 in the language / languages: English as an attachment in your email.

The manual is 7.61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haier Flexis Plus 2021

Haier Flexis Plus 2021 User Manual - Dutch - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info