771631

Haier Dawn Manual

8
Zoom out
Zoom in
Previous page
1/233
Next page
and outlet grills of the air conditioner are opened, and
the unit goes on working under the condition before the
grille will close automatically.
Notice:
Cannot pull direct the outlet grille by hand. Otherwise, the
grille will run incorrectly. If the grille is not run correctly,
stop for a minute and then start, adjusting by remote
controller.
Remote controller can memorize each operation status.
when starting it next time, just press ON/OFF button and
unit will run in previous status.
The setting of
function
The cancel of
function
Operation
HEALTH AIRFLOW OperationECOPILOT Operation
appears on the display. Avoid
the body.
again, appears on the display.
direct to the body.
Note:
2. In heating, it is better to select the mode.
3. In cooling, it is better to select the mode.
4. In cooling and dry, using the air conditioner for a
long time under the high air humidity, a phenomenon
falling drips of water occurs at the outlet grille.
5. Select the appropriate fan direction according to the
actual conditions.
TIMER
5
Human Sensing Function
1. “Follow” function: It can detect where a person is and
adjust the swing flap accordingly and send air to the
location of this person. If it detects people in two
locations, the swing flap will blow alternatively between
these two locations and stay at each location for 15s. If
the appliance detects people in three or more locations,
the left and right swing flaps will swing automatically.
“Avoid” function: When the appliance detects a person in
a location, it will adjust the swing flap to avoid such a
location. If it detects people in three or more locations,
the left and right swing flaps will swing automatically.
Note:
1) When there are people in several locations or a
person frequently moves between several locations,if this
person is in the in-between location or the crossing
location, whether the appliance is in a “Follow” mode or
an“Avoid” mode, theswing flap will swing automatically to
send air to these locations.
2) Whether the setting is “Follow” or “Avoid”, it takes some
time to adjust theair direction after the appliance identifies
the location of the people and the air direction will not
change immediately.
3) If the actual airflow cannot reach (or avoid) the location
where a person is due to such factors as fan speed setting,
temperature setting, ambient temperature difference and
layout of the room, pressing the left and right swing flaps
can adjustthe air direction and set the airflow direction by
hand.
4) Set the health airflow when the human sensing
(including follow/avoid) function is enabled and exit from
the human sensing (including follow/avoid) function.
5) Press the upper and lower swing flaps when the human
sensing (including follow/avoid) function is enabled, there
is no upper and lower full swing status.
6) When the appliance is in the upper and lower full swing
status, set the human sensing function (including
follow/avoid), the upper and lower swing flaps are in their
standard positions of relevant mode.
2. When the human sensing function is enabled, if the
appliance cannot detects people for a long time (at least
20 minutes), it will automatically enter the power saving
mode. In the power saving mode, the operating frequency
will lower down and the fan speed is low. Once a person is
detected, the appliance will exit from the power saving mode.
3. When the human sensing function is enabled, the
appliance will have a real-time detection of human
movements and adjust the frequency and fan speed
according to the movements. In the heating mode, if the
movements are frequent, the frequency and fan speed will
lower down; when the movements become less, the
frequency and fan speed will rise but cannot exceed the
setting values set by the remote controller. The cooling
mode is contrary to the heating mode.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haier Dawn at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haier Dawn in the language / languages: English as an attachment in your email.

The manual is 33.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info